Oulton Park club trackday Nov 12th. £125 open pitlane
Moderators: IMOC Moderators, IMOC Committee Members
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
TBH you'd need to get some advice from the specialists on here to know how the volume is for your type of system on track but there isn't too much stuff that pings the driveby as far as I know.
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Ok, I think I'll get it sound checked before I come anyway. Don't want that kind of disappointment
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
I've bought a sound meter, how do they test at Oulton? Is it drive by at 3/4 revs?
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
I don't know specifically for Oulton, but in the past the sound testing I've had to pass has been:
- Static test 3/4 rpm a couple foot from the exhaust (may have been a specific distance- not sure as I was in the car)
- Live drive by testing throughout the day, which if you are too loud you'll get pulled in (so depends where on the track the mic's are, which side of the track, etc)
HTH
- Static test 3/4 rpm a couple foot from the exhaust (may have been a specific distance- not sure as I was in the car)
- Live drive by testing throughout the day, which if you are too loud you'll get pulled in (so depends where on the track the mic's are, which side of the track, etc)
HTH
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Yep, cheers.
I'm not worried about the static test tbh. My car isn't that loud at 3/4 revs. It's purely the screamer when at full tilt. If I'm only running at 0.5bar (TBC) then the waste gate will be open for large periods of time methinks...
Obviously if there was just a drive-by test and that was it, I'd be able to just back off the throttle a bit.
I'll wait until it's running and see how loud it is under load.
I'm not worried about the static test tbh. My car isn't that loud at 3/4 revs. It's purely the screamer when at full tilt. If I'm only running at 0.5bar (TBC) then the waste gate will be open for large periods of time methinks...
Obviously if there was just a drive-by test and that was it, I'd be able to just back off the throttle a bit.
I'll wait until it's running and see how loud it is under load.
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Static is at 3/4 revs from 1m, drivebys vary hugely as the levels depend on the distance from the track of the sensor as well as whether it's a full acceleration zone, the angle or position of your exhaust, how the noise bounces off the local scenery etc. If you're OK on the static then 9/10 cars will have no issues on the driveby.
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Bought me a DB meter so will check once the engine works..
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Sadly, I am out
Car just won't be done in time, so parking it up for the winter while it gets a new engine.
Car just won't be done in time, so parking it up for the winter while it gets a new engine.
-
- Posts: 3271
- Joined: Tue Dec 14, 2004 12:22 pm
- Location: Oldham
- Contact:
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Is there any spare spaces Steve and if not how many reserves would be in front of me?
Engine rebuilt by: Steve Horrocks & Andy Jones
Engine mapped by: Ryan@2bartuning (330 bhp & 325 lbft @ 1.4 bar)
Current Status: F****D
Engine mapped by: Ryan@2bartuning (330 bhp & 325 lbft @ 1.4 bar)
Current Status: F****D
-
- Posts: 7172
- Joined: Thu Dec 16, 2004 6:39 pm
- Location: Oldham
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Andy, just seen this thread. If you were still contemplating letting menhae a drive, don't worry. I can't get the time off work. Was at least gonna come down for support. Sorry dude.
476bhp & 415ft lb @ 1.9bar Magic by Ryan!
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
Gone, but never forgotten
Now with a mk1.5 & a NHB EP3
-
- Posts: 3271
- Joined: Tue Dec 14, 2004 12:22 pm
- Location: Oldham
- Contact:
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Although there is one word that gets arount that ... Sickie
Engine rebuilt by: Steve Horrocks & Andy Jones
Engine mapped by: Ryan@2bartuning (330 bhp & 325 lbft @ 1.4 bar)
Current Status: F****D
Engine mapped by: Ryan@2bartuning (330 bhp & 325 lbft @ 1.4 bar)
Current Status: F****D
Re: Oulton Park club trackday Nov 12th. £125 open pitlane
Hi Andy, sorry I didn't see your post, the notification setup must have missed me out . We will be running a day at Brands in the new year, I'm about to post the thread, so hopefully you'll be able to join us for that.
Meanwhile, here's few snaps from Oulton -
Meanwhile, here's few snaps from Oulton -