How much boost should a standard Rev 3/4/5 tubby be producing? Tried searching but no joy.
Also whilst on the subject. How much boost are the CT20B's (Thats what's on the Rev3+ ain't it?) good for?
Cheers
Jamie
Standard Boost
Moderators: IMOC Moderators, IMOC Committee Members
Re: Standard Boost
0.9 bar, some up the boost to between 1.1 and 1.2 bar but that is at their own risk, the shaft of the turbo is ceramic and has been known to snap
Re: Standard Boost
So is standard boost 0.9bar? Or is that what the turbo is good for?
At what boost pressure does the turbo become inefficient?
At what boost pressure does the turbo become inefficient?
Re: Standard Boost
easty-5 wrote:So is standard boost 0.9bar? Or is that what the turbo is good for?
At what boost pressure does the turbo become inefficient?
0.9 bar is standard, boost is ok for 1.2 bar(around 290-300 bhp) with supporting mods of course.
After that the air temp will significantly increase which will probably end up in you losing power.
Re: Standard Boost
Spot on thanks buddy, exactly the answers I was looking for?
Next, what duty are the injectors running as standard? Uprated injectors needed for upping the boost?
I am guessing that the easiest & safest way to adjust fuelling is with an Emanage or similar?
Next, what duty are the injectors running as standard? Uprated injectors needed for upping the boost?
I am guessing that the easiest & safest way to adjust fuelling is with an Emanage or similar?
Re: Standard Boost
easty-5 wrote:Spot on thanks buddy, exactly the answers I was looking for?
Next, what duty are the injectors running as standard? Uprated injectors needed for upping the boost?
I am guessing that the easiest & safest way to adjust fuelling is with an Emanage or similar?
the standard injectors are good for around 330 bhp on a rev3 but that will be at their limit. The standard rev3 ecu is ok and can handle upping the boost, Adding a full standalone may yeild an extra 10/20 bhp but is it really worth it when you take the costs of the ecu and mapping into consideration
Re: Standard Boost
Okay, so when you say "supporting mods" what do you mean? Induction, decat, exhaust?
I have searched but there isn't really anything in th knowledge base.
I have searched but there isn't really anything in th knowledge base.
Re: Standard Boost
easty-5 wrote:Okay, so when you say "supporting mods" what do you mean? Induction, decat, exhaust?
I have searched but there isn't really anything in th knowledge base.
Pretty much, maybe add an intercooler or st205 chargecooler to that list plus boost controller
Re: Standard Boost
Excellent, thanking you. You have been very helpful indeed.
If there was a rep system then I would use it
If there was a rep system then I would use it