The injectors that came off the engine are part number 23250-16010, have a grey square plug and are 2.0 Ohms.
The spare injectors I have are part number 23250-16070, have a pink rounded plug and are 2.4 Ohms.
I don't know if they are close enough?
Search found 3071 matches
- Thu Jan 10, 2013 9:07 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
- Thu Jan 10, 2013 7:14 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
Ok, thanks again, before I do anything else I'll double check later what I have said above is correct, I am beginning to doubt myself
- Thu Jan 10, 2013 7:11 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
Thanks Paul. I have the old (modified) ECU that was fitted when Lauren bought the car and I will get the part numbers off this and the one that is now fitted. It's all a bit confusing :? I have absolutely no idea whether the setup was correct or not at the moment. I need to leave this to Lauren to s...
- Thu Jan 10, 2013 6:39 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
Ok, thanks for that Paul. :thumleft: Does Laurens 86 have a resistor pack Tom? If it does then pink ones will be fine, if not then Mk1a injectors will be the ones to use. No it doesn't. ....The ECU should cope with this change, they are similar impedance. Basically the injectors that were fitted hav...
- Wed Jan 09, 2013 10:30 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
It's not an electrical fault, that's all I know. I've tried all sorts including ultrasonic cleaning and it still won't work :mad:, I've wasted too much time on it :thumbdown: and now things have moved on in any case.... Those injectors are no longer available from Toyota. In fact no AE86 injectors a...
- Sun Jan 06, 2013 10:34 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
Thanks Gary. I've explained it all to Lauren and it's up to her what to do next. It doesn't stop the engine rebuild, everything can be done, just means the engine can't be started until the injectors are sorted. The part number of the injectors fitted are 23250-16010, it has a grey square plug that ...
- Sat Jan 05, 2013 5:18 pm
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
That's a nice rig Tom, i like that a lot. Thanks Paul. Will you be accepting donations for injector testing now Tom? :clap: :clap: Alex, shortly I will be working away for a while so won't be around. Certainly if someone needs to borrow it they can as long as I get it back. Presumably No. 4 was the...
- Thu Jan 03, 2013 9:38 pm
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Lauren's 4AGE build by Tom (Icunonsove)
- Replies: 112
- Views: 20636
Re: Lauren's 4AGE build by Tom (Icunonsove)
Well I ended up making an air powered test rig and one of the injectors is faulty. So that's good news, problem found :thumleft: If it's of any interest to others: Test rig build part 1: http://www.facebook.com/media/set/?set=a.10151446072541833.543115.765326832&type=1&l=490b1e1848 Test rig ...
- Mon Dec 31, 2012 9:52 pm
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Can I borrow a working fuel pump? Anyone in Manchester or Stoke areas?
- Replies: 5
- Views: 543
Re: Can I borrow a working fuel pump? Anyone in Manchester or Stoke areas?
Thank for reply Paul
I'd asked Mark (Lauren's other half) whether they'd got a spare pump and he said no. Lauren assures me she's got one though......
I'd asked Mark (Lauren's other half) whether they'd got a spare pump and he said no. Lauren assures me she's got one though......
- Mon Dec 31, 2012 8:52 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Can I borrow a working fuel pump? Anyone in Manchester or Stoke areas?
- Replies: 5
- Views: 543
Can I borrow a working fuel pump? Anyone in Manchester or Stoke areas?
As above, I just want to test some injectors and am bodging up a rig to do it. It's going to be awkward to use the car's fuel pump so am looking just to borrow a pump to do it off the car. Obviously I don't want to start removing fuel tanks etc so am wondering if I could borrow one that's already ou...
- Wed Dec 26, 2012 8:58 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: shim bank and valve adjustment tool
- Replies: 61
- Views: 82861
Re: shim bank and valve adjustment tool
Thanks for replies
Yeah, thinking about it I don't think I will need shims, I can always take material from the valve stem if I haven't got all the right shims.
Yeah, thinking about it I don't think I will need shims, I can always take material from the valve stem if I haven't got all the right shims.
- Sat Dec 22, 2012 9:43 pm
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: shim bank and valve adjustment tool
- Replies: 61
- Views: 82861
Re: shim bank and valve adjustment tool
Peter, do you now have it? Or has someone else got it?
- Wed Sep 19, 2012 1:48 pm
- Forum: Motorsport and Trackdays
- Topic: Britcar 24hr Race 2012 - This Weekend!
- Replies: 30
- Views: 8652
Re: Britcar 24hr Race 2012 - This Weekend!
Good luck Patrick, hope to see you there
(Don't suppose you have any spare tickets do you? )
(Don't suppose you have any spare tickets do you? )
- Wed Sep 05, 2012 1:51 pm
- Forum: Past Events
- Topic: Alton Towers - Saturday 29th September
- Replies: 4
- Views: 2298
Re: Alton Towers - Saturday 29th September
Oh dear, not much interest there then!
We're definitely going so if anyone wants to come along, get your tickets bought...
We're definitely going so if anyone wants to come along, get your tickets bought...
- Sun Sep 02, 2012 8:52 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: no crankpulley timing marks
- Replies: 19
- Views: 1812
Re: no crankpulley timing marks
If you think the timing is correct and you just want to service the distributor you don't need the crankshaft timing marks. Just mark the adjustment position with tippex and a scribe and the rotor position with tippex. There's only 13 teeth (28 degrees per tooth) on the distributor drive so you'll e...
- Sat Sep 01, 2012 7:03 am
- Forum: Motorsport and Trackdays
- Topic: 750 MC Race Meeting Donington this weekend
- Replies: 0
- Views: 1267
750 MC Race Meeting Donington this weekend
I love the 750MC meets (proper motorsport for proper enthusiasts and not just about money) and they are at Donington this weekend. Will try and get down for one of the days. Here's the schedule for others that might be interested: Today Practice 1 Demon Tweeks/Yokohama Classic Stock Hatch Championsh...
- Fri Aug 31, 2012 7:08 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Braided Brake Hose Adapter
- Replies: 20
- Views: 5810
Re: Braided Brake Hose Adapter
Sean, M10 x 1.0mm pitch is not interchangeable with 1/8" BSP
1/8" BSP is 28 threads per inch and has an outer diameter of 9.7mm.
M10 x 1.0 is obviously 25.4 threads per inch and has an outer diameter of 10mm.
This is dangerous.
1/8" BSP is 28 threads per inch and has an outer diameter of 9.7mm.
M10 x 1.0 is obviously 25.4 threads per inch and has an outer diameter of 10mm.
This is dangerous.
- Thu Aug 30, 2012 1:35 pm
- Forum: Past Events
- Topic: Alton Towers - Saturday 29th September
- Replies: 4
- Views: 2298
Alton Towers - Saturday 29th September
A few of us from the Mk1 SC forum have decided to go to Alton Towers on Saturday 29th September. Anyone else fancy it? :thumleft: Tom - Icsunonove Garrick - SystemG Jo - chargedchick Si - Blokey Lauren Mark - Shish Toni - tonigmr2 Alex - Speedy Sarah If tickets are bought online more than one week b...
- Sun Aug 05, 2012 8:43 am
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Head Gasket or Rings or something else?
- Replies: 44
- Views: 8503
Re: Head Gasket or Rings or something else?
Leak down testers are very useful :thumleft: I've misplaced (or lent out :? ) my 18" straight edge (or flat block) that I was going to lend to Lauren to check flatness of the head and block so I made another one. It's made from 1 1/2" (38mm) square ground square grade 01 tool steel! :shock...
- Fri Aug 03, 2012 12:23 pm
- Forum: MR2 MK1 1984-1989 NA & SC
- Topic: Head Gasket or Rings or something else?
- Replies: 44
- Views: 8503
Re: Head Gasket or Rings or something else?
I take it you'll be helping ? Well not unless I have to, I've had enough of engines this week. :mad: There's only so many pairs of hands you can utilise before people start getting in the way. Anyway, it's hard work working with Lauren, she's like a bull in a china shop and wants everything done ye...