www.imoc.co.uk

Actually the only differences are a hole for the winder and a semicircle cut out of the door pocket from what I remember. Some racing series require you to retain opening windows. Must be a pretty small winder tho. Most of the doorcard space is taken up by the armrest no? When i bought my first 2 ,...

I think it was this ?

75732‑17061‑D0 MAROON M., 3E5

http://www.toyodiy.com/parts/p_J_1991_T ... _7503.html

i spent ages choosing a gear knob i liked and when i finally settled on one it was the early hours of the morning, i clicked confirm then realised its a honda fitment of M10x1.5 :( i have contacted the seller but im not sure they will do a return even thought its not posted yet, my main question is...

Thanks , oil change on the jobs list i think

Try greasing the shifter itself under the console, and also might be worth changing the bushings on the cable at the gearbox end for the TwosRus ones. Definitely get some MT 90 in the gearbox if you haven't done so already. Done that apart from the oil ,fitted a short shift as well ,that was worse ...

Anyone suffer from the above ?

Autopista skirts are my favorite

Mines an import as well, but for the new bumper i bought the clear lenses, i wonder if i got standard import lenses and put them in would it pass. Our test in ireland is different to the UK MOT, but i think they only allow driving lights to be white or yellow. you need these lenses, http://www.ebay...

Ill have a look at the offset on the pins later today , those bulbs are just white though ? what front lights do you have fitted ,the all orange import ones ? if so it wont matter what bulb you fit, the sidelights will still be orange and a failure another option is to wire in some separate DRLs as ...

Standard lights have 2 bulbs,American spec have one you can drill a hole in the rear and fit UK or import looms ,what type depends on your fitment ,import and UK are different ,as are the fitment between revisions ive got a set of standard UK lights, orange and white ,with looms you could have for t...

You can buy the new masts from ebay and fit one of those http://www.ebay.co.uk/itm/SALE-AERIAL-MAST-TOYOTA-MR2-MK2-5-REV2-5-ROADSTER-LOCATED-BACK-WING-/110863307407?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item19cff7d28f or a second hand aerial http://www.ebay.co.uk/itm/TOYOTA-MR2-ROADSTER-ELEC...

these are what i have

Make sure the pivot section on top of the gearbox is ok ,there is a bush in there that wears or seizes up ,ill try and find the related article

I wouldn't say a nightmare to fit ,just that they wont bolt straight in without buying the expensive runners made by bride or others

if you can get an old set of seats, remove the runners and fit to your new seats ,i recently did it to a set of recaros ,no welding involved ,all bolted together

thanks for the reply, i'll have to the fill the holes that the last owner drilled to fit the skirts but other than that I'm happy. thanks :) depending where the fixing holes are ,you could drill them larger ,and fit some bungs that they fit when doing rust treatment ,saves filling and painting http...

As far as i knew only imports had these not the UK cars ? but In theory it should fit , you will need the link that connects to the steering rack as well ,as they come in different sizes ,ive got a tilt and rake column in the garage ,if you want to try it ,if it doesn't fit ill have it back .if it d...

Do a search for it ,i did this on my last car ,ill try and find the post as well

but basically you need to swap out a resistor in the blue control box ,make them go down instantly

I dont think you can buy cellulose for home DIY anymore ? new paints are water based ,or the 2pk

Thanks im just utilizing the tyres i have at present ,what will the difference i quoted effect ?

I'm planning on putting the rear wheels from my 2000 model onto the front ,and fitting face-lift rears ,this means the front tyre profile will be 55 and the rears 45 , I will finish up with ,fronts 205/55/15 rears 225/45/16, good or bad plan ? shall i just stick with standard face-lift sizes? Reaso...