www.imoc.co.uk

Hey all as above, mr idle is about 1200rpm when warm and 1500 when cold. Any ideas for this? my car is a rev1 turbo. I have checked the TPS and set that up correctly! Also as you know theres a screw on the TB which alows you to adjust the idle speed... Thats on its minimum setting! The AFM is also c...

Hey just info purposes as im going to be replacing some of my sensors soon, where is the water temp sensor located?

Cheers, Scott.

Im interested in doing this... Whats the best way to prep the cover?

Cheers

Leather reclining Rage bucket seats...

I have 215/35/18's on the front of mine and they rubbed the coilovers so i had to buy some 10mm hubcentric spacers from wheels uk. Between the bottom of the suspension cup and the tyre with a 30 profile is really really small with a standard setup so like stated above^ best to just jack it up and gi...

Thats what i was thinking when i watched it!

In the write up it says it races in the 2litre turbo and under class so it races with imprezas and evos etc..

Loving the look of it aswell, really nice!

Hope this isnt a repost people?...
I thought this was a pretty sick 2!

http://videos.streetfire.net/video/Toyo ... 193552.htm

http://videos.streetfire.net/video/Toyo ... 192784.htm

I know alot of people are wanting these INCLUDING MYSELF! but i have just bought coilovers so cant! But i found these when searching on eBay, anyone else seen them? i thought id post them up before some guy in a saxo buys them to modify to fit or something, grrr! http://cgi.ebay.co.uk/Original-Aero-...

Pretty smart them, i have an autogauge stealth boost gauge and its awesome.

I wouldnt mind getting one of the oil press or temp ones shown above but what would i need to fit it? i.e sandwhich plate or something?

Looks good, What Teins have you got on?

Well i have been wanting do this for a while anyways but the thing is, the car pulled really really well before hand so why should it bother it now?

Well my stock cat/dp cracked so i bought a motoria replacement. The one with all the sections welded together. I put the downpipe on a fortnight ago and the car now boosts at 1bar rather than 0.9. Which is all good. However! It seems like i have lost alot of torque, the car dosent pull as strongly a...

I replaced all my cooler pipes and clamps for mikalors and better hoses!

However there was a clamp at the bottom which wasnt quite on

Hehe thanks for all your help

Id say no! I done this very same thing a year and a half ago in my rev1 turbo. I replaced the oil but not the filter as it was relitively new. The oil in the filter was a different grade to the oil i put in the car, the sump pick up blocked with the mixture of oils and starved the motor of oil. Then...

When it was all done and my XS power intercooler and pipes etc.. where all tight i took my car for a drive(rev1 turbo). The car sounds like it has a massive boost leak, lumpy idle and when driving it makes a hishhhhhhhh sound when the motor is trying to boost. Then when it dumps it makes an even lou...

Cheers pal!

This is the second link, hope it works....

http://xxxx/catalog/p ... cts_id=131

BUT... Could you let me know if this fits a rev1 turbo? http://www.xs-power.co.uk/index.php?main_page=product_info&products_id=245&zenid=90be9d37521352ab7744f5758a065a17 and also if these are the bolts i need... xxxx...cts_id=131 and where could i buy a gasket online to mate it up to the tur...

Hey peeps, Travelling home from work in my rev1 MR2 turbo and the engine decides to get realllllly loud! So up on the jacks and my standard down pipe has cracked! Doh! Does anyone know where i could get a new stainless one from? it has to be good quality! Also does anyone know of a place around the ...

Cheers for the advice guys.
You say the tubby holds 4.1l?

Thanks

Hey all,
What grade oil should i use im my rev 1 tubby? Am i right in thinking fully synthetic 10w 40? I have seen some 0w40 Castrol Edge will this be no good?
Also how much oil does my engine hold?

Thanks