www.imoc.co.uk

on ebay

now on ebay!!

stekay wrote:Hi do you still have theses for sale

yes

RedMR² wrote:How much posted for just the pair of 16 x 7 ET 35 Enkeis?

Defo 5x114.3 Mr2 fitment? What's the center bore on the back of the wheel?

Thanks.

£175 posted

definately mr2 fitment, had them on mine.

c/b 65mm on rears.

Try the well where the tyre sits, thats what I meant dude. You should see a bead of sealant... Pry some of it away and see if you can see any welding bead. You cannot tell from inside the wheel the barrel is just one big single piece, looks machined, no sealant or welding going on there. i'll take ...

Just scraped all round the inside of the mating edge between the inboard barrel and the back of the hub part and there doesn't appear to be any weld, so i assume they are shrunk on or pressed into place.

i'll have a look tomorrow afternoon and let you know sir.

sorry, i dunno how that ended up here, should've been on the job lott thread.

i would post the wheels yes.

i may consider parting due to the lack of interest in the lot. the reason i wanted to get rid of everything is so i'm not left with hundreds of bits taking up all my space, that and it takes alot of time and effort which i just don't have. Just thought i'd add, the engine in the frontal damaged car ...

bump!

bump

Bit more info, they are 16", fronts are 8" wide and rears are 9" wide.
I'm not sure on the offsets but they sat nicely on the car when I had them on there.

£500

yes they are in kent, apologies though I cannot take any swaps or part ex's, I'm trying to sell stuff to free up space you see.

I have this set of alloys off a previous MR2, they are 16 inch, look a bit like work equips, but actually racing hart. Need a polish, otherwise good condition. £600 http://i1324.photobucket.com/albums/u612/john_skinner1/IMG_1117_zps770f9d88.jpg http://i1324.photobucket.com/albums/u612/john_skinner1/...

I have a miss matched set of enkei alloys. Fronts are solid and the rears are splits. good stagger, gives a mean stance when fitted. :D Fronts 16 x 7 ET 35 Rears 17 x 9 ET 22 One rear has a bit of curb damage. Very light wheels. Oh yeah, pcd is for mr2 114.3 I think... £250 http://i1324.photobucket....

A pair of mr2 space savers, good for banding. £50

Right, so my rev1 turbo was misfiring under load so I changed the spark plugs and then thought I might as well check the dizzy, which turned out to be shagged. I had some rev2 leads, dizzy, rotor arm, cap and ignite/coil knocking about so fitted all these to the rev1 but found the big loom plug woul...

Right, so my rev1 turbo was misfiring under load so I changed the spark plugs and then thought I might as well check the dizzy, which turned out to be shagged. I had some rev2 leads, dizzy, rotor arm, cap and ignite/coil knocking about so fitted all these to the rev1 but found the big loom plug woul...