www.imoc.co.uk

Could it be a dry bearing such as the cam belt tensioner.

When I put Koni inserts into the original strut on an Astra GTE it was advised to put anti freeze into the strut before the insert to help with cooling.

Seem to recall adjusting my actual clutch pedal at the pedal box inside the footwell to raise the bite point higher up the pedal travel as it was near the floor as opposed to half way, long shot!

Decisions decisions a sealed edge as much as possible might be better than water sitting behind the strip.

Could it be a 3m product.

Rev 5 Turbo here spark plugs Denso IK22 colder than the standard Denso IK20 both iridium and both gapped correctly new, not advisable to mess with gaps on iridium plugs. If you apply copperslip anti seize compound on threads only back off torque by 20% standard torque 13ft-lbs (18Nm).

Thought approx 1998 UK N/A was around £24,000 I was told if a Turbo had been sold in the UK it would be over £30,000.

Offset could be referred to as ET**

I think its possible to turn the key to quickly from off to engage starter position because in a thrice the relays have to react. So key insertion in at position 1 then turn key to position 2 at lightning speed sometimes catches out the relays signal and operation, perhaps the push button starter sw...

Could Halfords have pushed the grommet inwards and it is lodged behind your carpet just a thought...

I'm assuming the rubber belts are less flexible and tighten up slightly in a colder environment more so if used less than regular where engine heat helps with this constriction.

Forget comparison sites look to www.classicline.co.uk good for many owners. Not a classic car ins but a regular year by year no claims discount accrual so like normal. Can specify miles per year approximation. Whereas actual classic car insurance is like emmigrating after two years you've lost your ...

Look to mr2 oc there is a car gathering of a sorts at The Green Man near Silverstone track (Syresham nr Brackley) its Sunday 13th...November

Look to mr2 oc there is a car gathering of a sorts at The Green Man near Silverstone track (Syresham nr Brackley) think its next Sunday 16th...

Try www.classicline.co.uk
Tel 01455 639000
Liecestershire

Popular for members here.

Wiper arms could try Trevor at TCB Performance parts, i bought Bosch aerowipes and seem really good there is an element of PTFE in the rubber mix and glide. 30% discount at eurocarparts before friday.

What about fuel injector cleaner every 5,000mls STP etc not a fan of Redex myself. Personally i never use supermarket fuels that allegedly have less cleaners!
Fill up with Shell Optimax etc and add STP cleaner or similar and hope the crap gets dislodged and blows out the exhaust.

Sump plug thread is M12 x 1.25mm

I removed my foams years ago and even now i wonder, the foam absorbed condensation and held it, but without the foam does condensation still drain into a blind spot but evaporate better than if held in the foam.
Good Luck with the new 2...

Your bodywork friend has a point my C West side skirts were secured with self tapping screws, not great!