Search found 158 matches
- Wed Feb 15, 2017 4:22 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hard starting and stalling
- Replies: 6
- Views: 619
Re: Hard starting and stalling
No ideas or are the symptoms too broad still?
- Sun Feb 05, 2017 5:52 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hard starting and stalling
- Replies: 6
- Views: 619
Hard starting and stalling
Hoping to get some diagnosis ideas on the following issues. Gave the 2 a good punt today and due to the cold air in the evening i think it was pushing the limits of the map im running. Anyways after that noticed a slight ticking noise on acceleration that sounds like an exhaust leak. It is also stru...
- Sat Jan 21, 2017 5:56 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Top feed fuel rail / injector setups
- Replies: 9
- Views: 1361
Re: Top feed fuel rail / injector setups
I used to use a sard top feed fuel rail but then after changing the head to a rev3 turbo I had to get a new fuel rail Asaph so gave an eBay one a try. Made sure I put it together carefully to ensure everything would seal properly and got it on and mapped and it's been behaving very well.
- Mon Oct 17, 2016 1:58 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Tyres & Waxoil
- Replies: 11
- Views: 1445
Re: Tyres & Waxoil
Yup I like rainsports too.
- Mon Sep 19, 2016 4:03 pm
- Forum: Mk2
- Topic: [FINALIZED] Garage Clearout, one off rear, TRD, DeCat, Rev3 Loom, ACL Race bearings, etc.
- Replies: 21
- Views: 4086
Re: [FINALIZED] Garage Clearout, one off rear, TRD, DeCat, Rev3 Loom, ACL Race bearings, etc.
I'll buy the rev 1 turbo HT leads. PM me payment details.
Thanks
Thanks
- Fri Jul 08, 2016 12:38 pm
- Forum: Mk2
- Topic: MR2 Parts Clear Out
- Replies: 14
- Views: 3720
Re: MR2 Parts Clear Out
How much for the 4 rev 3 brake discs if you still have them?
- Thu Jun 30, 2016 1:47 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Driver door central locking issue
- Replies: 3
- Views: 576
Re: Driver door central locking issue
Thanks Odin. I'll pull off the one in there to see which type I need. Saw something about UK and import versions being different.
- Tue Jun 28, 2016 11:42 pm
- Forum: Mk2
- Topic: Big garage clear out - loads of goodies!
- Replies: 32
- Views: 7165
Re: Big garage clear out - loads of goodies!
Do you still have the ebc ultimate brake pad set? If so can you pm me a price delivered please.
Thx
Thx
- Sun Jun 26, 2016 12:16 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Driver door central locking issue
- Replies: 3
- Views: 576
Driver door central locking issue
Hi peeps, My drivers side door has stopped opening or closing on the central locking (either keyfob or being inside and pressing the door lock/unlock button). The passenger side door still locks/unlocks fine though. Do you think this is a wiring issue in the loom between door and footwell or is it a...
- Thu Jun 23, 2016 1:57 pm
- Forum: Parts for Sale (not Mk-specific)
- Topic: [FINALIZED] Prosport Analogue Wideband AFR Gauge Kit 52mm
- Replies: 6
- Views: 2864
Re: [FINALIZED] Prosport Analogue Wideband AFR Gauge Kit 52mm
Will it fit where the lambda sensor would normally go though? I have a motec M4 so it doesn't use lambda readings anyway so I have it sat plugged into the downpipe but not connected. Would like to take it out and replace it with a wideband.
- Thu Jun 23, 2016 9:54 am
- Forum: Parts for Sale (not Mk-specific)
- Topic: [FINALIZED] Prosport Analogue Wideband AFR Gauge Kit 52mm
- Replies: 6
- Views: 2864
Re: [FINALIZED] Prosport Analogue Wideband AFR Gauge Kit 52mm
I'm interested. Is the sensor just a swap for the lambda sensor in the downpipe for a Mk2?
- Mon Jun 13, 2016 5:36 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Vinyl wrapping.
- Replies: 4
- Views: 611
Re: Vinyl wrapping.
Would recommend looking into a plasti dip paint job. Much much cheaper and looks pretty good.
- Thu May 26, 2016 5:14 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Recommend me someone to set up my suspension please...
- Replies: 10
- Views: 557
Re: Recommend me someone to set up my suspension please...
DC Autos in Frogmore are good. Most accurate alignment I've had done before.
- Mon May 02, 2016 4:05 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Walbro fuel pump
- Replies: 8
- Views: 706
Re: Walbro fuel pump
Mine has been good. But heard there are fake ones floating about so just pay out and buy a genuine once and be done with it.
- Wed Apr 20, 2016 11:02 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: bc coilovers setting ride height
- Replies: 6
- Views: 614
Re: bc coilovers setting ride height
Ask DC Autos in frogmore. They may do it.
- Fri Apr 15, 2016 5:07 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Is it bad to hit fuel cut / Dodgy indicators?
- Replies: 11
- Views: 2072
Re: Is it bad to hit fuel cut / Dodgy indicators?
Yeah not good to be driving to fuel cut level. It may start leaning out just before and you are risk of det. Which EBC do you have? They normally have settings to control boost creep so that you can control the wastegate behaviour even when you have hit your target boost.
- Tue Mar 15, 2016 2:28 pm
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Hi Folks
- Replies: 9
- Views: 788
Re: Hi Folks
Welcome to the club mate. Lot of fun to be had in these cars.
- Tue Mar 01, 2016 11:07 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Longer wheel studs
- Replies: 35
- Views: 14420
Re: Longer wheel studs
I bought some extended rear wheel studs off ebay that were supposed to be specifically for the rears on MR2 SW20. The splines didn't fit. Ended up getting those ones I linked above all round.
- Fri Feb 26, 2016 11:20 am
- Forum: MR2 MK2 1990 - 1999 NA & Turbo
- Topic: Laser Alignment
- Replies: 38
- Views: 1738
Re: Laser Alignment
Thx gazza. Interesting read
- Mon Feb 22, 2016 5:24 pm
- Forum: Modifications
- Topic: [Mk2] [Turbo] engine hose kits
- Replies: 1
- Views: 542
Re: [Mk2] [Turbo] engine hose kits
I use stoney racing coolant hoses. Good quality and fit and have been happy with them so far.