www.imoc.co.uk

does he do CF wings too?

I bought an OEM wing a month ago and they were available in mainland europe 200EUR a piece

http://www.fensport.co.uk/Parts/Model_21/Category_12/28

not pointing you to Fensport or something, but ARP makes a decent kit. in fact, one of the best head studs you can get

if its just surface, i would definitely treat it with some POR15 stuff
if it is rotten then cut and weld in some floor of better condition (from a breaker maybe?)

for one-man bleeding jobs, I have acquired one way valve. lets you pump out fluid to reservoir but won't suck in air. you can then just pump pedal and refill master cylinder tank a few times until there are no bubbles/air in the intermediate bleeding hose (between bleed nipple and valve) http://www....

Its 4,3. That 3,7 is used in celica for example.

Fascinating use of rubber floor mats all over the body

sorry guys. I almost puked in my mouth upon seeing this. can't find an angle that would make this car look OK.

get a side scoop from paul and route it to the intake. much shorter than the side vent. i have removed the original air box from the boot and mounted apexi cone there (70mm silicone elbow 45*). air feed tubing from side vent is left intact. also removed the resonator from engine bay (another 45* elb...

Black diamond do a set. Cant remember the price but they are bare ss overbraid with non ss fittings. Strut tabount is steel and kit doesnt include banjo bolts. Hel do a set too. Ss overbraid is pvc coated (range of colours), fittings are ss but strut tab mount iscplastic. Kit includes banjo bolts an...

What tubing are you going to use? I got myself cunifer but the simple hand press just wont shape it. Copper sounds too weak to me .. and steel rusts ..

i am considering CF front wings

a chap driving octavia rammed my left wing a month ago. i was thinking of gettinh FG wings from honeybourne but i managed to get genuine wing rom toyota so i am tempted to get it moulded as long as its new and unfitted

my car is spinning hankook ventus r-s2 tyres sized 195/50 R15 but i cant comment on their performance because it is far superior to my will to abuse the car. in other words, I havent tried their limits yet

were the seats 5-point-harness-ready from new or did you have to modify the padding and covers?

both topics are ok but not in the same thread I would say. a split would come in handy here

The train of on-topic has derailed a looong time ago

browsed the egay the other day (night) and found this...

http://stores.ebay.co.uk/Stoney-Racing/ ... 2279550013

might come handy

Like!

I was impatient pressing old bushes out so I have gone with the burn method (sometimes the fire just puts itself off, so the bush needs to be set on fire again). For assembly, I have fabricated a simple ghetto tool. With that, pressing new bushes in is a one finger job. https://lh5.googleusercontent...

bridge the B+ and Fp terminals in the diagnsis box, strip the center console cover, undo the fuel pump connector and measure whether there's voltage present after turning the key into ACC position. If there's voltage, you can also test the pump in situ (ie save the hassle of dropping the bomb... eh,...