www.imoc.co.uk

what sort of real world mpg do these things do ???

Well to wrap this adventure up . . Yesterday i sold the mr2 ,It was sad to see it go but the next chapter in my life has started ,buying a house . Watch this space for my lawnmower build when i get one , gonna forge a briggs and stratton engine and run nos on it ,Hoping for a 24 inch blade on an 18 ...

Chris wrote: That inlet manifold on the black car looks interesting. I bet it flows really well...
.

nothing like a good 90 degree bend to mix the fuel and air up

I'm liking the all white speaker wire looking wiring to the injectors

chris, i want to do it to mine purely so i can get shot of the dizzy , : But as for trigger wheel, you dont need one as you can use the signal from the dizzy : do you want the dizzy or not :oldtongue: if you are keeping the dizzy for the sensor then why not keep the stock HT leads , will look nicer...

i had a similar problem on my mr2 mine was misfiring like a beatch at about 4k for about 2 miles it then cleared . was ok for about 3 months then it just stopped for no reason .i immediateley thought it was a problem with my powerfc, turned out the ignition coil was fubarred . the metal bracket the ...

7th prestige since release isn't really that good to be honest. Most people I know got to 10th in about 2weeks, some one on ps3 managed it in a week if your good enough you can easily do 1 prestige a day :shock: 10 prestige in a week :shock: :shock: :shock: :shock: :shock: :shock: I work a 9-5 and ...

xbox


marc3sgte

i have had over 18 sets for my mr2's
i currently only have 4 sets in stock though

black gts wrote:
iv read you have to do the learning thing if you diconect the battery , is this true ?

cheers paul

definiteley not ,mine sits there for weeks on end with the battery disconnected and is always fine when i reconnect it

have you got a diffeernt map sensor ?? i seem to remember the 800's in mine were set to 65 when i had toyota map sensor ,when i changed to gm map sensor i think it got changed to 56 was a lot easier to change that by a few percent rather than change every point on the map . i would say 63 would be f...

just use the nylocs ,a little trick i do is to fill the allen key hole up with grease stops the hole rusting and consequently rounding off when the rust comes loose .
also put grease on the thread after you have done the nut up ,
this will also stop corrosion from making the nut stiff to come off

about max of 4 hours labour to do a belt and parts from £20 for a non genuine belt ,up to about £100 for a non gen belt and bearings ,going to about £250 for a genuine toyota belt and bearings depends what they charge an hour round your way toyotagt (3s service centre ,mr2 specialists ) are fairly c...

possible the brass heater pipes which run above the fuel tank have a leak, very hard to spot as tends to drip ontop of the undertrays so cant see it
easiest to see if you take off the manifold heatshield and look where the brass pipes run through

i played bc1 consistently for over a year online , i love it .i'm going through a bit of a mw2 phase at the moment but cant wait for bc2, i have played the demo on ps3 and apart from the rubbish controller thought it was ace cant wait for it on 360

DannyN wrote:

3sgte wrote:he will not play it online as he doesnt get any achievments for it

Then he is a fool

i know . he is missing out on the best bits of the game

my brother is obsessed with achievments he played mw2 all the way through on veteran first and then give up on it he will not play it online as he doesnt get any achievments for it ](*,) he has had an xbox for about a year and has got a gamer score of 50,000 odd i have had one for 4 years nearly and...

i would just change the oil in the sump as normal. the oil cooler and pipes will not hold that much so there shouldn't be too much old oil in there anyway .

Struggling to trace some of the plugs on the loom. http://farm3.static.flickr.com/2730/4227352519_526f28df34.jpg Throttle position sensor http://farm3.static.flickr.com/2512/4227351051_c20efb9637.jpg distributor http://farm5.static.flickr.com/4068/4228119442_826a93e7c3.jpg igniter and coil http://f...

looks like it may have the nissan hamburger outline on it aswell

GTS GAV wrote: (AND STAY CLEAR FROM WOSSNER!!!)

why do you say this

i have wossner pistons i have no piston slap issues and they have coped with 10000 miles of mixed abuse up to and beyond 450 bhp