www.imoc.co.uk

Yep, that was cleaned. And looks like it's ok.

A month or two ago, when I replaced the the ignition parts (rotor, dizzy cap, leads and plugs).

Is possible to tune the idle in Rev2 MK2 NA?

I think that Rev2 are equal to Rev3 and so on.

Before I change the ISCV the idle are at 850RPM+- but with rough idle, up and down... Now with the ISCV replaced the idle is stable, but at 1000RPM.

Yes, the TB and ISCV were cleaned. In my hands the car didn't had any adjustment in the throttle, related to this just the cleaning of the TB/ISCV and the ISCV electrical part replacement. But I don't know if the previous owner did any adjustment. But the car feels ok pulling at full throttle, and c...

Just to update the situation. I replaced the ISCV - the electrical part only ( http://www.imoc.co.uk/forums/viewtopic.php?t=153753 ) and the rough idle disapeared. But with that I got a new symptom... Now at cold it idles at 2000RPM (normal behavior), then drops and keeps stable at 1000RPM when warm...

Just to tell that I also have the PowerFlex steering rack bushes installed.
The steering feeling seems to be better, but can be placebo effect

Hi, I bought a new ISCV sensor, ordered the 22270-74070, but received 22270-74210. Both looks the same, and the resistance between terminals are ok. Can I replace the older sensor with the new I bought (even with the different part number)? I think that the sensor is equal in all part numbers, and t...

Bridged the E1-TE1 terminals and the engine lights blinks continuously. So, no problem with error code. I doubt that's a problem with the cooling systems, because the rough idle problem happened before and after I renew the entire cooling system. Thanks for the tips, I will keep searching for what c...

The mechanical part of the ICV has been cleaned, and looks like is ok. Can it be a problem in the electrical part of te ICV (where the connector is plugged)? Also, justo to help diagnose, the coolant system was been entirely rebuilt, the ignition parts (rotor, dizzy cap, leads and plugs) are new, an...

The first batch of Powerflex steering rack bushes have been produced and some testers are on their way to myself. A set will also be trial fitted to a non-power steering rack SW20 MR2. The bushes will fit in LHD cars? My MR2 is LHD and I'm interested in the steering rack bushes. Also, in some posts...

I got a MK2 NA Rev2 and since I got them I notice a problem with idling. When the engine is cold the idle is set to higher RPM and once it's warm it drops to 850RPM+-, the normal procedure. But when the engine is warm sometimes I notice the rough idle between 750/950RPM+-. Is not always, it can idle...

Solved the problem fitting a DENSO DOX-0109.

Order from USA.

I got a new condenser, DENSO original, for near 230 GBP with import duty.

If your car are Rev1/2 you need DENSO part number 477-0110.

I ordered from this website, http://www.sparkplugs.com/results_cross ... 0&x=47&y=5

Hi, I bougth the Japspeed Manifold for N/A engine (3S-GE) and I'm trying to fit it, but I'm having problems with fitting the lambda sensor (oxygen sensor). My car is a Rev2 (Fev/1992) and has the DENSO DOX0208 or DOX0216 (flange type). The Japspeed Manifold uses screw type lambda sensor so I cannot ...

I've got my BC's fitted and after a damping adjustment tuning on a CEMB DCA3 the best values for what I've got are: Type: BR-Type with pillowball top mounts Springs: Front 4kg/mm - Rear 6kg/mm MR2: Rev2 N/A LHD Tyres: Standard sizes Dunlop SP9000 With driver inside and half tank of fuel. Clicks from...

I'm also searching for a new aircon rad for my rev2.

Any news?

Any help about what type of bulb do I need?

Thanks

Hi,

I want to change the interior courtesy light to led. What type I will need? BA15 type?

Cheers,
Pedro

Just one quick answer.

If I want to top up the coolant level is just fill at the filler cap until the coolant reaches there?

And what about the reserve tank... Is it doing anything? At least for what I saw it's only a place where the excess coolant goes in. Am I right?

Cheers!

I'm still waiting to receive the ARB's but in Whiteline's site it says the rear has only 2 holes. Maybe it's wrong.

Thanks for the tips
I will set up in middle at front and inner at rear.