www.imoc.co.uk

solved - sorry can be deleted

hi, i found out that it seems to be that all LSD gearboxes were the same. also my US gearbox had metric threads. i read this : The OEM viscous LSD will act like an open diff when you turn the axles by hand. Its not until you build fluid pressure on the diff will it actually lock the two shafts. If s...

Hi fellas maybe you can help me out here... Today it was time for my brandnew transmission - which i bough over a user in USA.As far as he could tell it was a 95LSD tranny for the MR2. Today we installed this thing and experienced some problems. First problem was that the tranny was 2mm away from my...

i see - thats what ive read.
so any other trustfull filters?
is there a K&N Solution?
Do i better go for as big as possible + then with a reducer to my "little" turbo or is it ok to go with the same pipe diameter that the turbo has on its compressor housing?

i see iam sure will to customize the pipe. but till yet iam not sure which filter to take? i saw the HKS ones and they look to rough from the pattern to me. Apexi filters are hard to get as far as i experienced they have problems wit Apexi Japan.maybe they are going down or whatever,i wanst able to ...

no that would suck in all those little birds and cats and stuff
i dont want that stuff in my engine bay.
it must be possible to go arround that fuel pipe.i bet lots of guys had the same problem before

Rogue, yeah i did the trick with the threaded rod - and its the only way to get this right.But after a while my rod got used to the bending.So i had to go this route.the kit is great but missing some improvement. to the pictures - iam in a turbo swap right now so lot of parts are disasembled but i c...

Hi Jim thanks for the help. I often saw the 3sge NA Apexi Filters on Ebay and asked myself if i could use such somehow. ist sad they just use the produkt code and no measurements to see how big the connection is. Now iam not sure how to proceed.Which Filter must i get and how big should it be to not...

ah dang that would have been a nice air box.
anybody got a picture how this one is mounted?
i even dont know how the 3sgte gen3 stock airbox looks like because most people dont use it
hmm so no other suggestions ?
whats with HKS or is there a K&N option as a kit?

lol nice box.
i know that one.but how is it mounted?i mean did you forget about my spearcor style water intercooler
i dont have that much place on the left side.
i have the gen4 side feed intake so i dont want to go another IC route.

i made the hid conversion. and must say every other rev6 standard beam looks like a complete joke to me.i can upload images if you want to see what i mean. i also built in the hella beam adjuster and washer system. so making this swap correct is a task but its possible. i had to modify the rouge kit...

Hi Fellas, after i ordered an Apexi Kit for the late MR2 turbo and the deal fell through iam still on the search for a good intake on the MR2 turbo (Stock). i dont know if i can trust that air filter test that floats arround the internet showing that Apexi was best. i hope for some advise here. best...

hi toxo, nice thread to follow! i have a guy buliding my custom heatexchanger for the front.Its without hose pipes.instead its for earls fittings.so i have more space for a bigger rad. now this thing is large.i asked myself if there will be a problem with the heat of the engine water from the rad be...

sorry ggrice - i have no answer for that - i just hope i dont have that problem on my Os giken twind plate. @Bob - i contacted RB and OS Giken japan.It seems like the Flywheels and clutches arent balanced.in fact i see the bore holes in my crank showing Toyota took metall off here..so its definetly ...

very interesting, Bob i got my STR2C a few dys ago. i asked myself (contacted OS giken too) if i have to balance this flywheel and clutch + my 3sgte gen3 crank (caldina).or if those parts as you sayed are good enough and i would waste money here? i read about dynamic balancing - thats not cheap - do...

hello fellas, thanks for your help i finally bought the OS Giken Str2c over Steve from RB. i talked to him and to OS Giken Support in Japan about this clutch.I know it handles much more power then i will have on my car.-but anyway i feel good with that decission. a friend of me asked about this Heli...

oh man is that true that there are so many parts faked.. ok i checked the site and did found another guy on ebay selling them.. called Hdmperformance.seems to have some other parts i need too. i compared with oversea prices and see its more expensive.but i guess thats because all those parts are imp...

where in Uk can i buy those cheap?

i think i have the numbers for bosch pumps.
beside them the marine pumps are 2ce as strong no?
tell me which you get then i need one too lol.
i thought about a meziere..

Hello fellas, i treid to get some infos on this in the German Forum but i didnt found experienced guys there regarding my problem.So i hope for you guys to help me here. I drive my Monoflex since a while now on my MR2 MK2 and was satisfied till now. I changed every bushing to Polyurethane kits.I als...