www.imoc.co.uk

3 out of the 4 boots need replacing so might aswell do all lot, however they are £80 per driveshaft from Toyota. Im all for doing things properly but im not paying £160 for 4 bits of rubber out of principle. Anyone had success with these universal types and got any links to some decent alternatives?...

Ive set my speedo by the sat nav and its been ok so far, tested it on a few radar speed boards too and it is bang on

pm'd

and its ground shaking lmao

i got a motoria one in good nick if ur interested in swap.

Cheers for that i got 4 straight hoses, i got 90 deg pipes instead of the 90 deg hoses you got, so in same boat really. Going to try and reuse some of the standard pipes for now to join everything up if i cant do that ill buy some new ones. So the original bolts do go in but its a b*tch thats all i ...

Dot4 is fine mate, heared 5.1 is recommended for track days etc, The rear ones screw in there is a tool you can but for this comes in handy

arggggggggg im missing 2 pipes, one to connect to throttle body and the one that connects to the turbo, anyone know what size hoses i need to order looks like a couple of reducers.
cheers

thanks mate, i mean you bolt the intercooler onto where the old original shroud bolted in, im using the bolts from this but having trouble reaching through the new shroud and intercooler bracket with them just wanted to see if people are using the same bolts as they look a bit small for purpose. Ill...

Ive seen it advertised by other companies and a lot of them say there is a 1psi drop in pressure.

im halfway through putting mine on mate the intercooler block itself looks like a nice bit of kit, got it in the engine bay just need to connect the hoses up. Good buy for the money if u ask me. Get the shroud before u put it on if u can, there will be a lot of room around the intercooler if you don...

Can anyone give me an hand ive got my old cooler out (what a pain! :@), Now ive screwed my shroud in at the bottom, there are 2 brackets on the bodyside of the new intercooler which i presume u bolt up along with the shroud (gtschris) im having trouble getting the bolts i took off the old intercoole...

Ive just gone and bought one with the shroud from gtschris, going to reuse my existing fan, ill let u all know how i get on in the new few days. Looks like a half decent kit for the price even if it turns out to be crap compared surely its better than the junk on there to start with.

Give it a clout with the palm of your hand usually stops mine! (for like 5 mins)

MR2 people near you, Sbits Barnsley and YVS Performance sherburn-in-elmet.

Ill bump it for more replies, the oil u got should be ok its fully synt, the mr2 manual suggests its ok but that was from the early nineties nowdays people recommend somethin with a higher rating as oil has moved forward somewhat. Its not recommended to mix oils too so id leave as is and top up with...

I think it will be ok but i think 5w30 is a bit on the thin side if your putting any sort of load on your car, i think a 10w40 would be better and this is generally what is recommended on this forum. I dont know much about all the API stuff but if your bored http://www.carbibles.com/engineoil_bible....

Cant you get a second hand box for a couple of hundred quid, should get a decent working one for that. 800 seems quite a lot.

Not sure about the bov although ive used one on my rev 2 and it ran like a piece of s*it, reason i say it could be a leak is i had a similar problem with oil dropping on the exhaust from a leak on the head and it filled the engine bay with smoke when stood still, could still be water leaking from th...

A leak from the head dripping onto the exhaust maybe if its from the engine bay? camcover gasket or worst headgasket