www.imoc.co.uk

=D>

i was gonna supply and fit one for silly money, now you gotta send me your girl for a few nights

if the number start o898.... its better not to answer ok

cheers mate! i will divert all my calls after 8pm to your mobile number

See what i mean

no but i do have a spare white coat i could pop in the post

Peter is the Mutz nutz-homeeee-dogsdoooodars-daywalker-beezneees-ring-dinga-bing-zing-King of the swingers-sh!t n shizzle-cuuuurze we need around here.

they are all to posh to flash and wave in Farnham matey

http://www.3sservicecentre.co.uk/forum/ ... sc&start=0

http://www.mr2oc.co.uk/index.php?name=F ... ic&t=30770

a pleasure.

Having driven your car i believe it to be one of the quickest rev3s with almost stock setup we have seen, very nice car indeed, take care.
James

looks identicle to the intercooler i have even the same mounting points, seriously heavy bit of kit

Afm

Check error code.
9/10 its the afm, dissconnect the plug, check for damage or water in the pins, reconnect, reset ecu then try. If this doesnt help you will need to do some continuity check to and from the ecu, if all is well, most likely the afm has given up.

James
3sservicecentre.co.uk

This is from TRD To ensure long life and reliability you must properly break in your freshly assembled engine. For a high performance street motor fill the engine with a good grade 20W-50 Mineral based oil. Fill the oil filter with oil before installing it. Remove the spark plugs and crank the engin...

Take the front panel off your ecu, there you will find all the pinouts labelled on the pcb where the pin meets, look for (spd) this is for the speed signal and you can splice into the wire that comes from this.

=D>

Hi Red.

The cooler is the least of the troubles, its the super hot air created by a crap turbo that asks to much of it, if you are asking about a stock cooler with stock ct26 then 280-300 on a rev2 imho. If its a hybrid all that changes.

Ask sport

yep you can do that.

try a rev3 turbo ecu and loom, can see why a bit of cutting and snipping couldnt have it running.