I have staggered R32 GT-R and GTS-T 16s, and ideally I want to keep them.
Anyone running different calipers?
I am interested in the Boxster S Brembo's, but seriously doubt they would fit.
[Mk2] [Turbo] Brake options for 16" wheels
Moderators: IMOC Moderators, IMOC Committee Members
[Mk2] [Turbo] Brake options for 16" wheels
Rev 2 GT - Forged Rev 3 Conversion
Re: [Mk2] [Turbo] Brake options for 16" wheels
Is there any reason other than cosmetic to upgrade the later model brakes?
As long as your current brake system is in top condition, you won't stop any quicker if that is what you are going for.
As long as your current brake system is in top condition, you won't stop any quicker if that is what you are going for.
Re: [Mk2] [Turbo] Brake options for 16" wheels
I'll be honest, a lot of it is cosmetic. IMO brakes filling the wheels are as important as the wheels themselves, looks wise.
Better fade resistance would be great too, without having to spend a fortune on uprating discs and pads for the OEM calipers.
Been looking at the WoolfKatz Wilwood kits, too.
If I could sack off the OEM rears and not have a xxxx handbrake and sticking issues (not long after rebuild) that would be most welcome.
Better fade resistance would be great too, without having to spend a fortune on uprating discs and pads for the OEM calipers.
Been looking at the WoolfKatz Wilwood kits, too.
If I could sack off the OEM rears and not have a xxxx handbrake and sticking issues (not long after rebuild) that would be most welcome.
Rev 2 GT - Forged Rev 3 Conversion
Re: [Mk2] [Turbo] Brake options for 16" wheels
Hey that is cool, nothing wrong with 'upgrading' them if you want to fill the wheels out more. It might take a little bit of work to get the balance right, but if you are willing to put in the work go for gold
Re: [Mk2] [Turbo] Brake options for 16" wheels
Might be some info here that interests you
https://www.mr2australia.com/mr2play/tm.aspx?m=96174
looks like the website is down so not sure if still in business but also this post from january on their facebook page
https://www.facebook.com/Delta-V-Austra ... 80/?ref=hl+
GTST/300ZX front calipers and stock rear caliper with Rx7 discs, main issue is going to be brake balance, will look awesome though.
https://www.mr2australia.com/mr2play/tm.aspx?m=96174
looks like the website is down so not sure if still in business but also this post from january on their facebook page
https://www.facebook.com/Delta-V-Austra ... 80/?ref=hl+
GTST/300ZX front calipers and stock rear caliper with Rx7 discs, main issue is going to be brake balance, will look awesome though.