Breaking of the Pheonix

dave5526 · Posted: Thu Aug 05, 2010 12:24 pm Post subject:

If bluesmoke doesnt have it I might still be interested in the shell in a completely bare state (i.e. metal only), as long as it's straight and relatively rust free. Would depend on price too as aquiring all the little bits and pieces would soon mount up, and collection would be relatively difficult without it rolling [Think]

I'm in no major rush/need though so see if bluesmoke wants it first.

lockys96 · Posted: Sat Aug 07, 2010 6:31 am Post subject:

if u want to pickup just a shell with nothing i think 300 is fair

lockys96 · Posted: Sat Aug 07, 2010 7:15 am Post subject:

ok, lots of parts have been sold

bride seats - GTS GAV 750 paid and collected
plenium, Q45 trottle - sflee 500 paid
fuel rail/inject/braid line - sflee 400 paid
mirrors - i got boost (tba) 200 paid collected
rear bumper/sideskirt - MR83 600 agreed on collection
ecu - ryan.g 1000 agreed

aem afr - 100 - sold to james customer
sard fpr - 50 - sold to james customer
rear rev3 taillights - 30 and
meshed centre panel between lights - 20 - sold to Yas cash on collection

main items still for sale
phoenix rare geniune spoiler / boot - 350
tein flex coilovers with adjustable top mounts front - 500
phoenix bumper, lights, light surroundings, front custom lip, carbon canards - 300
trust 3 layer gtr boot mount setup, with pipework fabricated 2.5 and silicone hoses clamps - 500
fujitsubo legalis r twin exhaust - 300 silent yet flows 480hp
Rev 3 calipers front/rear with project mu SCR pure plus rotors / endless ccr pads and app braided brake lines - 350 all corners
OMP 3inch 6 point race harness with fire proof shoulder pads - 100 cost 250 plus fire proof pads
OS Giken Phoenix power twin plate clutch, handles a lot of power, drives like stock car, here http://www.mrtwo.net/jupiter/Parts/GFukui/fukuicat6.jpg 1400 pound new 500
blits sus 4inch filter with silicone hose and pipework - 100
Full Race T4 twinscroll manifold, twin tial wastegated 44mm with twin screamer pipes, downpipe covered 500miles only, 2900 usd before shipping and tax, and fabrication cost of screamer pipes. thats over 2k and has additional high temp black heat coating. pictures tba, greeny will tell u about this product. - 1000 pounds
mr2eddy dash pod - 30
Uprated single HKS fuel pump with fuel tank - ?150 fuel lines
Driftworks oil cooler/relocation, custom fitted to stock intercooler place with relocation oil filter and thermostat -300
Plumed in msa lifeline fire ex - ?200
320mph trd Clocks rev 3 - 150
greddy oil pressure gauge - 80
hks fuel pressure gauge - 70
keys racing rare jdm swuade steering wheel with driftworks quick snap off kit and boss to fit - 200
phoenix power ignition leads - 100
trd white gear knob - 20
phoenix power oil Catch can - 100
front wings in 040 white - 50
doors in 040 white - 50
abs unit - 30
OMP 6 point race harness fia approved and in date, 3inch with fire proof pads can supply fitting rings etc - 100

Engine:
---------
Fresh rev 3 forged engine by Toyota GT (run 500 miles)
rev 2 block stronger block
2.1 litre
new water pump
new oil pump
All new acl bearings
Arp main/head studs
Cometic Head Gasket
uprated Valve Springs
86.5mm cp pistons
Modified 5s crank
Modified headwork by phoenix power
Eagle rods
phoenix power 272 10.2 high lift cams in/out
JUN cam pulleys
HKS cambelt

great engine, best car had ever run, and of course all mapping done by ryan.g and attention from 3s service

2,500 open to offers

lockys96 · Posted: Sun Aug 08, 2010 9:08 am Post subject:

Demon Buggy · Posted: Tue Aug 31, 2010 6:14 pm Post subject: Pictures

Hi everyone,

My names Jason and im Lockys96's bro. As he's in Japan i have been given the task of getting pictures of a few of the items and getting a few of the smaller items collected and will be packaging parts up and sending them off to you guys also.

Had the day off work today so have had to spend the day working on pictures/part removal. been a long old day.....................

Full Race T4 twinscroll manifold, twin tial wastegated 44mm with twin screamer pipes, downpipe

Driftworks oil cooler/relocation, custom fitted to stock intercooler place with relocation oil filter and thermostat -300 on hold

fujitsubo legalis r twin exhaust - 300 silent yet flows 480hp

Rev 3 calipers front/rear with project mu SCR pure plus rotors / endless ccr pads and app braided brake lines - 350 all corners

only pics of just the rears........

Plumed in msa lifeline fire ex - ?200

pull cord....

extinguisher bracket.....

spray nozzles.......

main extinguisher..........

phoenix bumper, lights, light surroundings, front custom lip, carbon canards - 300

phoenix rare geniune spoiler / boot - 350 on hold

slight chip in paint........

trust 3 layer gtr boot mount setup, with pipework fabricated 2.5 and silicone hoses clamps

.......

Demon Buggy · Posted: Tue Aug 31, 2010 6:25 pm Post subject:

yep, theres more................

keys racing rare jdm swuade steering wheel with driftworks quick snap off kit and boss to fit - 200

320mph trd Clocks rev 3 - 150 on hold

blits sus 4inch filter with silicone hose and pipework - 100

mr2eddy dash pod - 30

OMP 6 point race harness fia approved and in date, 3inch with fire proof pads can supply fitting rings etc - 100

greddy oil pressure gauge - 80

phoenix power oil Catch can - 100

thats it for the moment...............

SFLee · Posted: Tue Aug 31, 2010 8:07 pm Post subject:

suprise some of the stuff still here
when is locky come back from japan [Mr. Green]

and do you know the manifold and downpipe need to re fab if use a different turbo ?

Demon Buggy · Posted: Wed Sep 01, 2010 5:58 am Post subject:

lockys96 · Posted: Wed Sep 01, 2010 9:04 am Post subject:

engine and manifold now sold

Demon Buggy · Posted: Wed Sep 01, 2010 9:17 am Post subject:

lockys96 · Posted: Wed Sep 01, 2010 10:49 am Post subject:

no, just deposit so far, u have ecu money

Demon Buggy · Posted: Thu Sep 02, 2010 12:07 pm Post subject:

I will be at JAE also people (with Outlaw Jap Club) so if anyone wants me to bring along small parts to save on postage costs this can be done! Just need to give me a heads up so i can collect the parts.

Jason [Very Happy]

lockys96 · Posted: Wed Sep 08, 2010 11:18 pm Post subject:

lockys96 · Posted: Wed Oct 27, 2010 12:56 pm Post subject:

main items still for sale - list update 27th october

front wings in 040 white - 50

phoenix rare geniune spoiler / boot - packaged and ready to post - 300

tein flex coilovers with adjustable top mounts front - 500

keys racing rare jdm swuade steering wheel with driftworks quick snap off kit and boss to fit - 200

trust 3 layer gtr boot mount setup, with pipework fabricated 2.5 and silicone hoses clamps - 400ono

fujitsubo legalis r twin exhaust - 300 silent yet flows 480hp

Rev 3 calipers front/rear with project mu SCR pure plus rotors / endless ccr pads and app braided brake lines - 350 all corners
brother should have soon for updated pics

blits sus 4inch filter with silicone hose and pipework - 100

mr2eddy dash pod - 30

Uprated single HKS fuel pump with fuel tank - ?150 fuel lines

Driftworks oil cooler/relocation, custom fitted to stock intercooler place with relocation oil filter and thermostat -300

Plumed in msa lifeline fire ex - ?200 ono

greddy oil pressure gauge & hks fuel pressure gauge - 150

phoenix power oil Catch can - 100

doors in 040 white - 50

OMP 6 point race harness fia approved and in date, 3inch with fire proof pads can supply fitting rings etc - 100

hkwc104 · Posted: Wed Oct 27, 2010 2:21 pm Post subject:

Hi, I believe I've already paid for the wings (I transferred the money to your brother). Could you confirm this is the case as I'am currently awaiting to book some time with James to have them fitted.

marillion77430 · Posted: Sat Oct 30, 2010 11:56 am Post subject:

I want your brakes [Twisted Evil]

Are still for sale?

marillion77430 · Posted: Sun Oct 31, 2010 7:54 pm Post subject:

You have the pics of the front rotors and calipers?

Steve-O 2007 · Posted: Mon Nov 01, 2010 7:02 pm Post subject:

are them prices delivered?

wadeski · Posted: Tue Nov 02, 2010 1:10 am Post subject:

Locky, didja get my PM re:exhaust?

peterjf · Posted: Fri Nov 05, 2010 2:01 pm Post subject: pheonix parts

Is the front bumper and light assembly still available, if so have you any photos of it fitted to the car preferrable head on, where can it be collected from.Can the splitter be easily removed
You also have a vented bonnet on the car is that still available

Peter