Am rebuilding my engine at the mo and the head bolts that I have for it are marked for the N/A variant, are these the same for the turbo?
If so what sort of power can they handle?
Head Bolts
Moderators: IMOC Moderators, IMOC Committee Members
Head Bolts
Hi
Am rebuilding my engine at the mo and the head bolts that I have for it are marked for the N/A variant, are these the same for the turbo?
If so what sort of power can they handle?
Am rebuilding my engine at the mo and the head bolts that I have for it are marked for the N/A variant, are these the same for the turbo?
If so what sort of power can they handle?
-
Bender Unit
- Posts: 3835
- Joined: Wed Dec 15, 2004 1:15 pm
- Location: Sh*tting a Rainbow!
- Contact:
Re: Head Bolts
Are they ARP?
I have a set of stock Rev3 head bolts if you want to do a deal? Thats if the ones you have are not suitable for the job?
Regards
James
I have a set of stock Rev3 head bolts if you want to do a deal?
Thats if the ones you have are not suitable for the job?Regards
James
Re: Head Bolts
ARP studs are the same for 3sge or gte i believe, got a set for my n/a rebuild but the block was cracked so never used them, kept them for the day my headgasket goes on the turbo along with a TRD 1.2 mm gasket
'02 VX220 2.2 n/a Daily driver - Exige Size TD 1.2 - TAT shorty Diffuser - HardTop - Chris Tullet 4-1 Manifold.'97 mk1 Mazda Eunos Turbo track car with 260bhp/ton - soon more as Chris Wilsons going to build me an engine over the winter 
) .