Toyota 3sge Revision 3 ACIS Spacer Group Buy
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Toyota 3sge Revision 3 ACIS Spacer Group Buy
Had some interest in this from a few people so thought I would see if there was enough interest to start a group buy as a first batch.
Our 25 mm CNC machined spacer made from aircraft grade aluminium, gold anodised. Comes complete with new bolts and, genuine toyota ACIS gasket.
Here's a pic of one fitted to our engine in our race car.
Picture without cover on can also be seen on our website
http://www.hurleyraceengineering.co.uk/page4.htm
Prices
single unit kit - £159.99
2 - 3 units - £150
4- 7 units - £140
8 - 14 units - £135
15 plus - £130
Postage will be 7 pounds to a uk address,
Group buy will run until 30th September, please PM to be part of it and I will update a list . Once the buyers are finalised and cost is determined i will need a 50% deposit by Paypal from each buyer before I manufacture the batch . The Other half to be paid once the batch is ready.
Our 25 mm CNC machined spacer made from aircraft grade aluminium, gold anodised. Comes complete with new bolts and, genuine toyota ACIS gasket.
Here's a pic of one fitted to our engine in our race car.
Picture without cover on can also be seen on our website
http://www.hurleyraceengineering.co.uk/page4.htm
Prices
single unit kit - £159.99
2 - 3 units - £150
4- 7 units - £140
8 - 14 units - £135
15 plus - £130
Postage will be 7 pounds to a uk address,
Group buy will run until 30th September, please PM to be part of it and I will update a list . Once the buyers are finalised and cost is determined i will need a 50% deposit by Paypal from each buyer before I manufacture the batch . The Other half to be paid once the batch is ready.
Last edited by HurleyRacing on Fri Aug 16, 2013 9:01 pm, edited 1 time in total.
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
I'm in
1. Matt-mr2
Does it come with the decal
1. Matt-mr2
Does it come with the decal
Last edited by matt-mr2 on Fri Aug 16, 2013 6:41 pm, edited 1 time in total.
My TRD WIDEBODY build thread http://www.imoc.co.uk/forums/viewtopic.php?t=164957
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Well you would use your own top cover but yes I can provide the Gold Decals for it
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
I don't need one myself as I already have one but for anyone interested, these really are great bits of kit
Last edited by Ryan6926 on Fri Aug 16, 2013 8:30 pm, edited 1 time in total.
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Last edited by HurleyRacing on Fri Aug 16, 2013 8:37 pm, edited 1 time in total.
-
- Posts: 237
- Joined: Wed Jul 14, 2010 1:17 pm
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Ah I want one what's the benifits of it? I was looking at the kamikaze ones ages ago but nobody really knew the benifits
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Lee8ballauto wrote:Ah I want one what's the benifits of it? I was looking at the kamikaze ones ages ago but nobody really knew the benifits
The main benefit is that it add's more torque which is handy on the Rev 3. I had one and noticed an increase from 2k rpm where it felt noticeably quicker,
In addition upon putting the car on a dyno I also found my car was still making power at the rev limiter as opposed to another GT which was standard which peaked around 7k
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
yep, what ryan said.
taken from our website.
''The HRE ACIS Volume Plate increases torque at acis change over by changing the acoustic signal and providing a larger chamber of air to draw upon, which in turn increases power, typical gains 3-7 bhp on an engine in good Condition. Works especially well on engines running fast road cams with a greater overlap than standard''
taken from our website.
''The HRE ACIS Volume Plate increases torque at acis change over by changing the acoustic signal and providing a larger chamber of air to draw upon, which in turn increases power, typical gains 3-7 bhp on an engine in good Condition. Works especially well on engines running fast road cams with a greater overlap than standard''
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Can I just ask how come you make them at 25mm? I'm just curious to height choice
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Sure...two reasons really. its what we felt was right for the engine,( using experience from other similar engines) and the fact that the majority of people will have standard cams or fast road cams.
Also it's a stock material size. Therefore eliminating wastage and keeping cost down. Can make them any size you like however cost will vary.
Also it's a stock material size. Therefore eliminating wastage and keeping cost down. Can make them any size you like however cost will vary.
-
- Posts: 3781
- Joined: Fri May 28, 2010 12:04 pm
- Location: London, Edinburgh, or the Highlands!
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Does this mod work on most engines?
There must be some kind of trade off between the increased air and thus power and torque, and something else? Why don't cars come with enlarged plenums from the factory?
Would it work as well/better/worse on a larger engine? An 8 cylinder?
There must be some kind of trade off between the increased air and thus power and torque, and something else? Why don't cars come with enlarged plenums from the factory?
Would it work as well/better/worse on a larger engine? An 8 cylinder?
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
It depends on what the engines acis type system/ plenum are like and how well they breathe to start with.
With any modification to any engine there is nearly always a trade off, whether it be induction noise, fuel economy , engine bay/ bonnet restrictions, cost to the manufacturer etc. These are all reasons as to why manufacturers do the things they do. The same question could be asked about free flowing exhaust manifolds etc
As to a v8 again it depends on the engine. All engines are effectively air pumps, so to increase power you have to have better breathing, more air or turn it faster , more revs.
With any modification to any engine there is nearly always a trade off, whether it be induction noise, fuel economy , engine bay/ bonnet restrictions, cost to the manufacturer etc. These are all reasons as to why manufacturers do the things they do. The same question could be asked about free flowing exhaust manifolds etc
As to a v8 again it depends on the engine. All engines are effectively air pumps, so to increase power you have to have better breathing, more air or turn it faster , more revs.
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
We now have two down so far for the group buy.
1 matt-mr2
2 Kevin ( non imoc)
1 matt-mr2
2 Kevin ( non imoc)
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Work on a rev5, stock engine. Gasket wise do you supply one for top and bottom of spacer?
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
yep works as same chamber as rev 3, supplied is a single gasket. if your existing one needs changing we can supply another at cost however not included in the kit
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
I'd be interested if it gives the same gains on a Rev5. What could I expect with a standard cam? Also, how much would an additional gasket be?
Cheers
Cheers
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
I have just fitted a ACIS spacer / power deck spacer. Made a bit of difference low - mid in torque. Slight bhp gain i think. But definitely noticeable and i'd recommend buying one!
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
I would expect the same gains from rev 5, off the top of my head don't know exactly how much the gasket is, I have it somewhere and will drop you a PM when I'm back in the office, away racing this weekend now so won't be til Monday / Tues
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
Acis Gaskets are about a tenner from Mr T i believe.
-
- Posts: 220
- Joined: Wed Apr 13, 2011 8:50 am
- Location: Cambridgeshire
- Contact:
Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy
We have one more down for the group buy - One more person and we will be down to the next discount level.
1) matt-mr2
2) Kevin ( non imoc)
3) tezmc
1) matt-mr2
2) Kevin ( non imoc)
3) tezmc