Recently removed from a 460bhp ST185 GT4 is a Haltech E6K ECU complete with loom plug and tails.
The E6K might be old, but it was a leader in its time with sequential injector driving, closed loop fuel control and boost control to 30psi of boost.
Full spec. and manual here:
http://www.haltech.com/wp-content/uploa ... Manual.pdf
Wiring diagram here:
http://www.haltech.com/wp-content/uploa ... omRevF.pdf
Software for programming here:
http://www.haltech.com/wp-content/uploa ... 6Kv634.zip
The software only works in DOS, so an old laptop with a serial port will be required.
Lots of install info here:
http://www.peculierboy.com/haltech/e6k_main.htm
£75 delivered.
Haltech E6K ECU and Sensors - SOLD
Moderators: IMOC Moderators, IMOC Committee Members
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Haltech E6K ECU and Sensors - SOLD
Last edited by Peter Gidden on Sun Sep 28, 2014 10:39 pm, edited 2 times in total.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: Haltech E6K ECU and Sensors - SOLD
On ebay:
http://www.ebay.co.uk/itm/Haltech-E6K-E ... 1124wt_962
Currently at £84 plus postage. Bidders from Oz, Italy and Israel.
http://www.ebay.co.uk/itm/Haltech-E6K-E ... 1124wt_962
Currently at £84 plus postage. Bidders from Oz, Italy and Israel.
Re: Haltech E6K ECU and Sensors - SOLD
Dam I would take this for 75 peter. now I have to bid against italy?
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: Haltech E6K ECU and Sensors - SOLD
Found a couple of brand new sensors (worth £20+ each), and some other related bits and pieces.
Added to auction.
Added to auction.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: Haltech E6K ECU and Sensors - SOLD
Don't say i don't offer you guys bargains!
£225 on ebay and 2 hours to go.
And to the IMOC member that PM'ed me telling me he'd give me £20 "cos tat's all old stuff like that is worth" i trust my finger wasn't to uncomfortable as you swivelled on it... ,
£225 on ebay and 2 hours to go.
And to the IMOC member that PM'ed me telling me he'd give me £20 "cos tat's all old stuff like that is worth" i trust my finger wasn't to uncomfortable as you swivelled on it... ,
Re: Haltech E6K ECU and Sensors - SOLD
damn pete did nice money on ebay
Re: Haltech E6K ECU and Sensors - SOLD
Peter Gidden - SBITS wrote:And to the IMOC member that PM'ed me telling me he'd give me £20 "cos tat's all old stuff like that is worth" i trust my finger wasn't to uncomfortable as you swivelled on it... ,
Lololol
Re: Haltech E6K ECU and Sensors - SOLD
Went for a bit more than £75 quid in the end then!
Out of interest, would you be able to program this from a newer machine with a USB -> RS232 adapter and DOSBox? It would be an easier solution for most people!
Out of interest, would you be able to program this from a newer machine with a USB -> RS232 adapter and DOSBox? It would be an easier solution for most people!