Due to very unfortunate circumstancesost of my prize assets are being sold. Gutted is an understatement but needs must. So my mr2 is being broken.
Nearly all parts available and has some mods.
Rebuilt engine with 86.25 CP pistons, total seal rings, ARP bolts etc (done about 6000 miles) £1000. Runs fine but now out the car and needs a timing belt on it as I took it off to check water pump and oil pump etc before going to clean it all up and stick it back in the car.
ATS GT3076r turbo kit (fitted same time as engine was built) everything there to bolt onto a rev 3, you would just need new gaskets and bolts/nuts for adapter £1100
Sard fpr and braided lines £100
Rebuilt gearbox with lsd £300
ACT 6 puck clutch £40
Ebay sidemount intercooler kit with gts chris shroud and fan. £80
HKS Hi power silent exhaust in great condition but only have mild steel centre to go with it. £250
HKS evc5 boost controller £100
Innovate lc2 wideband and 4.2 sensor. Plug is slightly melted lol £60
Lots of other parts nearly everything available. Open to sensible offers on everything. Body panels are all great no rust and eveything works on car.
Only slight things are one rear light has small nick in corner and o/s/f caliper is sticking. Rear hubs and shafts and ecu are gone
Got nearly new genuine rear discs and pads also.
Pictures on request but I ask people to be patient as I am running a business too at same time as breaking the car.
[FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Moderators: IMOC Moderators, IMOC Committee Members
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
what is the A/R on the turbo and what dumpvalve do you have ?
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Ohh, and i know someone that is looking for 800cc injectors, i will message them
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
TURBO KIT PLEASE
EDIT:
Please can you confirm:
Mileage on Turbo
Any Shalf play in / out
Does it include everything in the ATS kit?
Cheers
EDIT:
Please can you confirm:
Mileage on Turbo
Any Shalf play in / out
Does it include everything in the ATS kit?
Cheers
Last edited by androo007 on Tue Oct 04, 2016 6:03 pm, edited 1 time in total.
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
androo007 wrote:TURBO KIT PLEASE DIBS
I was just about to dibbs it on your behalf,
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Sorry guys it doesnt have 800's they were sold last time it went off road.
Turbo i think is a .63 a/r but not 100% but deffo aint .82
Standard bov and 38mm tial rerouted back into the downpipe
Turbo i think is a .63 a/r but not 100% but deffo aint .82
Standard bov and 38mm tial rerouted back into the downpipe
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Inlet size fits the standard intake pipe also
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Martin F wrote:androo007 wrote:TURBO KIT PLEASE DIBS
I was just about to dibbs it on your behalf,
Sorry Martin I was just flying in caps lock 'n all going crazy didnt even see you had posted above!! Thanks pal
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
kev8611 wrote:Sorry guys it doesnt have 800's they were sold last time it went off road.
Turbo i think is a .63 a/r but not 100% but deffo aint .82
Standard bov and 38mm tial rerouted back into the downpipe
How much for the valve ?
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
As title mileage is 6000 odds. No shaft play in and out as its not that old and oil is changed every 2000 miles. Comes with everything needed to bolt onto the car. You will just need gaskets and nuts for adapter and the wastegate.
So its turbo, wastegate, adapter, downpipe. Oil feed and return lines with adapters, water lines
Yeah standard bov is fine £25 posted
Thanks
So its turbo, wastegate, adapter, downpipe. Oil feed and return lines with adapters, water lines
Yeah standard bov is fine £25 posted
Thanks
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
kev8611 wrote:As title mileage is 6000 odds. No shaft play in and out as its not that old and oil is changed every 2000 miles. Comes with everything needed to bolt onto the car. You will just need gaskets and nuts for adapter and the wastegate.
So its turbo, wastegate, adapter, downpipe. Oil feed and return lines with adapters, water lines
Yeah standard bov is fine £25 posted
Thanks
Ok, if it works fine with no leaks and has the rubber ring i will take it off your hands, can you pm me a photo of the whole unit and send me payment details, thanks
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Yeah works perfect. Will get pics in a bit
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Forgot to mention. Got a set of standard alloys that were refurbed in silver and are still perfect. Will leave tyres on them too
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Thanks kev. Can you pm me your phone number please?
Cheers
Andy
Cheers
Andy
-
- Posts: 2025
- Joined: Mon Aug 05, 2013 8:18 pm
- Location: Swindon, Wilts
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Is the wideband still usable? If so can u pm me best price posted please
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
hello, how much would shipping of the gearbox to slovenia be?
thanks
thanks
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Sorry bit if you want the gearbox shipped to there then i would prefer if you organised your own courier and I will package it up.
Re: Rev 3 turbo forged in black 202. Modded gt3076, cp's
kev8611 wrote:Due to very unfortunate circumstancesost of my prize assets are being sold. Gutted is an understatement but needs must. So my mr2 is being broken.Nearly all parts available and has some mods.
HKS evc5 boost controller £100
Lots of other parts nearly everything available. Open to sensible offers on everything. Body panels are all great no rust and eveything works on car.
Pictures on request but I ask people to be patient as I am running a business too at same time as breaking the car.
Hi,
Would like to buy your HKS boost controller please.
Also could you do me a photo of the engine cover and rain tray please?
Thanks,
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Hi,
Yeah no problem.
Pictures will have to wait until weekend though but its black, not damaged and everything intact....
Yeah no problem.
Pictures will have to wait until weekend though but its black, not damaged and everything intact....
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Re: [FINALIZED] Rev 3 turbo forged in black 202. Modded gt3076, cp's
Any pics of the car bud?