Hey gang
I have genuine set of Ray's for sale.
Have all the stamps at the back so no fake ****.
I was going to keep,them and get them refurbished. Just need the space in the garage
Offsets are +40 upfront and +35 at rear.
One of the wheels looks like been welded on the lip at rear, only found this last week. There was no issues with them had them on the car for last 2 years.
They will need 6mm spacers up front to clear the oem struts on mr2
Looking for 650 with this in mind
There forged and bloody light
Have centre caps too.
Collection only from West Sussex
They will need a refurb as seen better days
[FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Last edited by almeida1234 on Tue Oct 04, 2016 9:13 pm, edited 2 times in total.
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Not to do you out of a sale but you realise they're worth in excess of £1k right? (especially in those sizes)
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
CalMac wrote:Not to do you out of a sale but you realise they're worth in excess of £1k right? (especially in those sizes)
This depends on how much of a refurb they require..
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
And the welded crack. Not sure if these will stick outside the arch or not anyone know what offset is a flush fit?
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
They'll stick out a little but not a huge amount.
Welding forged alloys is pretty safe, it's the cast cheaper ones which are an issue as you can't determine the composition of the metal (easily) and so can't weld them with the correct filler wire etc. Plus cast alloys will have impurities and porous areas throughout which makes TIG welding a nightmare!
If you refurb yourself and take your time, These could be tidied up with fresh paint for £60. Powder coated, probably about £250
Welding forged alloys is pretty safe, it's the cast cheaper ones which are an issue as you can't determine the composition of the metal (easily) and so can't weld them with the correct filler wire etc. Plus cast alloys will have impurities and porous areas throughout which makes TIG welding a nightmare!
If you refurb yourself and take your time, These could be tidied up with fresh paint for £60. Powder coated, probably about £250
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Yeah I have not seen many sets in these.
Had them on my Rx-7 before, the mr2.
They are very very light compare to my other 3piece rims
Had them on my Rx-7 before, the mr2.
They are very very light compare to my other 3piece rims
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
CalMac wrote:They'll stick out a little but not a huge amount.
Welding forged alloys is pretty safe, it's the cast cheaper ones which are an issue as you can't determine the composition of the metal (easily) and so can't weld them with the correct filler wire etc. Plus cast alloys will have impurities and porous areas throughout which makes TIG welding a nightmare!
If you refurb yourself and take your time, These could be tidied up with fresh paint for £60. Powder coated, probably about £250
The lower the offset the more they will stick out so these will sit a little inwards of the arch and need a spacer for clearing coilovers.....
+35 is flush front fitment with an 8j width.
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Who want these babies, lots of interest but no takers yet.
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Rob wrote:CalMac wrote:They'll stick out a little but not a huge amount.
Welding forged alloys is pretty safe, it's the cast cheaper ones which are an issue as you can't determine the composition of the metal (easily) and so can't weld them with the correct filler wire etc. Plus cast alloys will have impurities and porous areas throughout which makes TIG welding a nightmare!
If you refurb yourself and take your time, These could be tidied up with fresh paint for £60. Powder coated, probably about £250
The lower the offset the more they will stick out so these will sit a little inwards of the arch and need a spacer for clearing coilovers.....
+35 is flush front fitment with an 8j width.
If they were 8J and 9J I'd agree with you, but they're not
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
CalMac wrote:Rob wrote:CalMac wrote:They'll stick out a little but not a huge amount.
Welding forged alloys is pretty safe, it's the cast cheaper ones which are an issue as you can't determine the composition of the metal (easily) and so can't weld them with the correct filler wire etc. Plus cast alloys will have impurities and porous areas throughout which makes TIG welding a nightmare!
If you refurb yourself and take your time, These could be tidied up with fresh paint for £60. Powder coated, probably about £250
The lower the offset the more they will stick out so these will sit a little inwards of the arch and need a spacer for clearing coilovers.....
+35 is flush front fitment with an 8j width.
If they were 8J and 9J I'd agree with you, but they're not
Agreed, just seen they're half an inch bigger, did he state that originally and I completely misread it?!
OP - suggest you post these up on driftworks I reckon they will go mad for these widths ...
Last edited by Rob on Tue Oct 11, 2016 8:24 pm, edited 1 time in total.
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Yep! haha
That's why I was saying they're cheap - they'd be a nice fit on an FD or S-Body, problem is most of those guys wants 18's
That's why I was saying they're cheap - they'd be a nice fit on an FD or S-Body, problem is most of those guys wants 18's
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
Could you weight it ?
-
- Posts: 450
- Joined: Sun Aug 15, 2010 12:48 am
- Location: west sussex
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
What do you mean?
As weight per a wheel?
If that's what you mean it's about 7.3 to 7.9 KG per wheel
(Staggered set)
As weight per a wheel?
If that's what you mean it's about 7.3 to 7.9 KG per wheel
(Staggered set)
-
- Posts: 6071
- Joined: Wed Dec 15, 2004 10:16 am
Re: [FINALIZED] Genuine set of RAYS TE37 17" 2x8.5 and 2x9.5 staggered fitment
This Sale has been completed. The Buyer was Non-Member