Ok,
So most of the posts in this section are regards to fitment of component speakers, which ones require spacers, and which dont. I think its about time that we made a collective list of what we have installed, and how many mm's of spacing were needed, eg 2 x 18mm mdf = 36 etc.
I will then keep this list updated and get a photo how-to added. hopefully it can be made a sticky and will be of great help to those changing/uprating their speakers.
But for this to work everbody needs to reply here with what they have and what spacers were needed!
Cheers
Neil
Speaker fitment / Wiring diagrams. please contribute!
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Speaker fitment / Wiring diagrams. please contribute!
Last edited by Neil_turbo on Mon Oct 23, 2006 8:41 pm, edited 1 time in total.
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
MK2.............
Front..........
5"...
Focal Poly Kevlar 130K - straight swap. Tweeters needed casing cutting down to fit inside tweeter location.
5.25"...
Helix HXS235 - 12mm spacer
5.5"...
.
6"...
Oz Audio Matrix Elite 6" Components - approx 1" spacer, tweeters unsure
6.5"...
6.5" DLS R6A -15mm spacers, Tweeters straight swap.
Focal Access 165 - 18mm Spacers, Tweeters straight swap.
Focal k2's 165mm - 11mm Spacers, Tweeters straight swap.
Infinity Kappa components 165mm - straight swap, Tweeters straight swap
Infinity Reference - 24mm spacers, Tweeters straight swap
Helix RS6.3 - 36mm spacers, Tweeters no chance!
Image Dynamics CX62 - 36mm spacers (mid-bass units)
Rear..........
infinity reference 3.5" - straight swap
infinity reference 5.25" - hacksaw!
kicker K35 3.5" coaxials
mac audio 3.5" coaxials, fit in two of the four holes
MK2 Sub Boxes..........
Alpine SWR-1022D/1042D (old type r, white face) - Yes
Diamond Audio D6
Diamond Audio M3101.8 10"
DLS W310B - Will fit, but only reccommmended for ported enclosures of 1.2CuFeet
Infinity Ref 1040W 10" - Yes
JBL GT4-10
JL 10W1V2 - Yes (some JL baskets maybe smaller than 10", please specify if you want a smaller hole when ordering!)
MTX Thunder 5500 10" Yes
Phase Linear Aliante 10SI - Yes
pheonix gold octane ZR10D2 - Yes
phoenix gold xenon 10" 10d2 - Yes (remove rubber magnet cover)
Rockford Punch Stage 3 P310D2/D4 - Yes
Sony Xplod XS-L101P5S - Yes
Vibe PT-100 - Yes
Require 18mm deeper boxes
Alpine SWR-1022D/1044D (new type r, black face)
Sony X-Plod XS-L121P5S 12"
Require 36mm deeper boxes
Audiobahn AW1206T 12"
MK2 Wiring Colours..........
A1 Light Green - Front right (+)
A2 Pink - Front left (+)
A3 Grey - Ignition Switch
A4 Blue Green - Battery
A5 Blue - Front right (-)
A6 Purple - Front left (-)
A7 Brown - Earth (Ground)
A8 Pink Blue - Antenna (power control)
A9 Black Red - Amplifier (power control)
A10 Green - Dimmer
B1 Red - Rear right (+)
B2 Black - Rear left speaker (+)
B3 White - Rear right (-)
B6 Yellow - Rear left speaker (-)
Wiring Diagram For Premium System with 1 Sub (UK & European+Aussie)
MK1.............
Front..........
Rear..........
MK1 Sub Boxes..........
Diamond Audio M3101.8 10"
Phase Linear Alliante 10si
MK1 Wiring Colours..........
Front left +ve : Pink, Red dash
Front left ve : Purple
Front right +ve : Light Green, Red dash
Front right ve : Blue
Rear left +ve : Black, Red dash
Rear left ve : Yellow, Red dash
Rear right +ve : Red, Blue dash
Rear right ve :White, Red dash
Constant supply : Blue, Yellow stripe, Red dash
Switched supply : Grey, Red dash
Earth : Brown
Lights : Dark green
Ariel : (2 wires on car both connected to same radio wire)
a) Black, Red stripe, Red dash
b) Pink, Blue stripe, Red dash
Front..........
5"...
Focal Poly Kevlar 130K - straight swap. Tweeters needed casing cutting down to fit inside tweeter location.
5.25"...
Helix HXS235 - 12mm spacer
5.5"...
.
6"...
Oz Audio Matrix Elite 6" Components - approx 1" spacer, tweeters unsure
6.5"...
6.5" DLS R6A -15mm spacers, Tweeters straight swap.
Focal Access 165 - 18mm Spacers, Tweeters straight swap.
Focal k2's 165mm - 11mm Spacers, Tweeters straight swap.
Infinity Kappa components 165mm - straight swap, Tweeters straight swap
Infinity Reference - 24mm spacers, Tweeters straight swap
Helix RS6.3 - 36mm spacers, Tweeters no chance!
Image Dynamics CX62 - 36mm spacers (mid-bass units)
Rear..........
infinity reference 3.5" - straight swap
infinity reference 5.25" - hacksaw!
kicker K35 3.5" coaxials
mac audio 3.5" coaxials, fit in two of the four holes
MK2 Sub Boxes..........
Alpine SWR-1022D/1042D (old type r, white face) - Yes
Diamond Audio D6
Diamond Audio M3101.8 10"
DLS W310B - Will fit, but only reccommmended for ported enclosures of 1.2CuFeet
Infinity Ref 1040W 10" - Yes
JBL GT4-10
JL 10W1V2 - Yes (some JL baskets maybe smaller than 10", please specify if you want a smaller hole when ordering!)
MTX Thunder 5500 10" Yes
Phase Linear Aliante 10SI - Yes
pheonix gold octane ZR10D2 - Yes
phoenix gold xenon 10" 10d2 - Yes (remove rubber magnet cover)
Rockford Punch Stage 3 P310D2/D4 - Yes
Sony Xplod XS-L101P5S - Yes
Vibe PT-100 - Yes
Require 18mm deeper boxes
Alpine SWR-1022D/1044D (new type r, black face)
Sony X-Plod XS-L121P5S 12"
Require 36mm deeper boxes
Audiobahn AW1206T 12"
MK2 Wiring Colours..........
A1 Light Green - Front right (+)
A2 Pink - Front left (+)
A3 Grey - Ignition Switch
A4 Blue Green - Battery
A5 Blue - Front right (-)
A6 Purple - Front left (-)
A7 Brown - Earth (Ground)
A8 Pink Blue - Antenna (power control)
A9 Black Red - Amplifier (power control)
A10 Green - Dimmer
B1 Red - Rear right (+)
B2 Black - Rear left speaker (+)
B3 White - Rear right (-)
B6 Yellow - Rear left speaker (-)
Wiring Diagram For Premium System with 1 Sub (UK & European+Aussie)
MK1.............
Front..........
Rear..........
MK1 Sub Boxes..........
Diamond Audio M3101.8 10"
Phase Linear Alliante 10si
MK1 Wiring Colours..........
Front left +ve : Pink, Red dash
Front left ve : Purple
Front right +ve : Light Green, Red dash
Front right ve : Blue
Rear left +ve : Black, Red dash
Rear left ve : Yellow, Red dash
Rear right +ve : Red, Blue dash
Rear right ve :White, Red dash
Constant supply : Blue, Yellow stripe, Red dash
Switched supply : Grey, Red dash
Earth : Brown
Lights : Dark green
Ariel : (2 wires on car both connected to same radio wire)
a) Black, Red stripe, Red dash
b) Pink, Blue stripe, Red dash
Last edited by Neil_turbo on Sun Nov 26, 2006 3:28 pm, edited 16 times in total.
Infinities
I have just put some infinity reference 5.5" and the speaker fits straight in with the tweeter using the same mount as the existing and just bolting straight on.
Great sound - easy fit, deep tone.
Gavin
Great sound - easy fit, deep tone.
Gavin
Re: Speaker fitment / Wiring diagrams. please contribute!
5" Focal Poly Kevlar 130K.... straight swap. Tweeters needed casing cutting down to fit inside tweeter location.
I think all 5" speakers fit straight in without spacers??
Cheers,
Jon
I think all 5" speakers fit straight in without spacers??
Cheers,
Jon
-
- Posts: 926
- Joined: Mon Aug 08, 2005 5:57 pm
- Location: Stoke
Re: Speaker fitment / Wiring diagrams. please contribute!
Hi Neil.
I've got Focal Access 165 (6.5") which needed 18mm spacers. The tweeters fit straight into the stock location though.
Nik
I've got Focal Access 165 (6.5") which needed 18mm spacers. The tweeters fit straight into the stock location though.
Nik
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
Cheers Nik, Jon, Gav (Welcome to IMOC )
List updated!
We are going to need more speakers if this list is going to become usefull!
Cheers
Neil
List updated!
We are going to need more speakers if this list is going to become usefull!
Cheers
Neil
speakers...
sorry, made a boob - mine are 6.5" in the front - but still went straight in with no mods whatsoever.
(nice to be welcomed!)
Gavin.
(nice to be welcomed!)
Gavin.
Re: Speaker fitment / Wiring diagrams. please contribute!
mk2. 6.5" DLS R6A comps in the front with a 15mm spacer. Tweeters went straight in.
sub in Neil's box is Infinity 10" 1040W
sub in Neil's box is Infinity 10" 1040W
Re: Speaker fitment / Wiring diagrams. please contribute!
i got kicker 6.5INCH ni the front sound perfect!!!! and a nice jbl 10inch in the back of passesnger seat
-
- Posts: 2766
- Joined: Tue Dec 14, 2004 1:48 pm
- Location: Wellingborough (or thereabouts)
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
Great idea Neil. Perhaps one of the Admin team could make this a sticky for this section?
Mk2 NA Rev1 -*- Mk2 Turbo Rev2 -*- Mk1 NA -*- Mk2 Turbo Rev 3 = all gone!
_______________________________________
"Cruisey, Sporty, more innovation, more adult. A Man In Dandism. Powered mid-ship specialty."
_______________________________________
"Cruisey, Sporty, more innovation, more adult. A Man In Dandism. Powered mid-ship specialty."
-
- Posts: 42
- Joined: Sat Jun 04, 2005 2:07 pm
Re: Speaker fitment / Wiring diagrams. please contribute!
MKII
Helix HXS235 - I believe 12mm baffle
Helix RS6.3 - mid needs a 36mm baffle, or with light surgery to the door you can get away with 18mm, no hope of tweet fitting in stock location mind.
Image Dynamics CX62 - magnet just fits through door hole, again 36mm baffle to fit without surgery.
Helix HXS235 - I believe 12mm baffle
Helix RS6.3 - mid needs a 36mm baffle, or with light surgery to the door you can get away with 18mm, no hope of tweet fitting in stock location mind.
Image Dynamics CX62 - magnet just fits through door hole, again 36mm baffle to fit without surgery.
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
Bonmaklad wrote:i got kicker 6.5INCH ni the front sound perfect!!!! and a nice jbl 10inch in the back of passesnger seat
Any spacers required mate - tweeters fit ok?
Cheers
Neil
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
SwitchBlade wrote:MKII
Helix HXS235 - I believe 12mm baffle
Helix RS6.3 - mid needs a 36mm baffle, or with light surgery to the door you can get away with 18mm, no hope of tweet fitting in stock location mind.
Image Dynamics CX62 - magnet just fits through door hole, again 36mm baffle to fit without surgery.
You know what sizes these are off-hand, if not will find out on google
Cheers
Neil
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
Sidewinder wrote:Great idea Neil. Perhaps one of the Admin team could make this a sticky for this section?
Cheers Nige!
It should save a lot of questions in this part of the forum, will speak to a mod when its a bit more developed!
-
- Posts: 42
- Joined: Sat Jun 04, 2005 2:07 pm
Re: Speaker fitment / Wiring diagrams. please contribute!
Sorry mate the 235s are 5.25" the others are 6.5".
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
Cheers mate, you know about the tweeters on the last set?
Nice Install btw!
Neil
Nice Install btw!
Neil
-
- Posts: 42
- Joined: Sat Jun 04, 2005 2:07 pm
Re: Speaker fitment / Wiring diagrams. please contribute!
The Image Dynamics are just mid-bass units. There are ID tweeters and horns to go with them but I've not owned either.
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
cheers mate! Updated again!
Re: Speaker fitment / Wiring diagrams. please contribute!
great idea neil, can we have this as a sticky mods?
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: Speaker fitment / Wiring diagrams. please contribute!
cheers mate!
were going to need more contributions if this is going to be any use as a sticky!
Come on people!
were going to need more contributions if this is going to be any use as a sticky!
Come on people!