[Mk2] [Turbo] Which apexi PFC I got?

Anything to do with the electrics of the car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

[Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Bought it from ebay and wan't to make sure it's for my ride. OK. My ride is 92 JDM 3s-gte engine with afm..

serial number of PFC is:
PFC SW21 9807-0003

board number is:
FC3-A 05984-L5001-00

in one part got number in paper:
FC3-SW21-2

and one another got:
CEX-9610-085-SW20
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Please. If someone who has PFC for rev2 could look in his PFC if any of these numbers look at same. Or could it burn any sensor or ecu if I just plug it in.
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by raptor95GTS »

http://www.imoc.co.uk/forums/viewtopic. ... light=murf gives some number but not sure if any use to you
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Thanks, but no help. I think that sw21 mark in my pfc is that thin what counts
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Has apexi made rev2 pfc it self or are there only ap engineering for that.

And if here is someone who has pfc which serial number starts sw21 please please send me pm or something.
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Got post from apexi dealer that this is real deal rev2 PFC, but he wrote that I need some sensors and wiring.. Could someone told me what I should do and what sensors could I use. OEM or could I use some cheapers things.
splashnatz
Posts: 2068
Joined: Thu Feb 24, 2005 12:23 pm
Location: LEEDS

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by splashnatz »

um, pretty sure only the AP ones are for Rev 2 ! Have a word with JimGTS, he had an AP PFC before swapping to the rev 3 ECU.
jimGTS
Posts: 14024
Joined: Tue Dec 14, 2004 1:40 pm
Location: North Kent

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by jimGTS »

IF you have a AP engineering power FC its a direct plug and play on a JDM rev2, late 91 to late 93 car...
IF you want to ditch the AFM you can on this PFC model, youll just need to splice into a couple of the AFM lines and fit AIT and MAT sensors, fit a rev3 map sensor and just change the options on the hand held commander.

IF you have a USDM car, then im pretty sure your going to need to rewire it to take a rev2 JDM harness....
if it is a gen3 POWER FC, then you need to certainly rewire to a jdm rev3, fit numerous OEM sensors from a rev3
i can check the codes on both my AP and gen3 power FCs tonight!
:thumleft:
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

My ride is -92 feb JDM...
simmo490
Posts: 3526
Joined: Sat Feb 19, 2005 6:19 pm
Location: FROME, SOMERSET

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by simmo490 »

best way to find out is to plug it in see if it runs :)

i had a rev2 PFC AP engineering but it did not say that anywhere and there serial numbers ment nothng.

so i plugged it in and hey presto it worked. as far as i know its been used in a rev 2 now all mapped up properly

simmo
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

And if its not plug n play and it needs those sensors and wiring can it burns something??
jimGTS
Posts: 14024
Joined: Tue Dec 14, 2004 1:40 pm
Location: North Kent

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by jimGTS »

wouldnt like to say, but i wouldnt have thought it would start....
whether or not it burns anything, is pot luck i would have thought
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

Oh I forget one thing... The PFC got adapter harnes... It was in rev 1, and there is only few wires that switch places... Should I use this?
Gary ST165
Posts: 229
Joined: Wed Apr 26, 2006 4:54 pm
Location: South Wiltshire
Contact:

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by Gary ST165 »

i'm no expert on MR2 (wrong forum for me :oops: )

but from what i've read :confused: the SW21 9807-0003.

My Toyota EPC does not have this listing... Is that a USDM vehicle and uses the normally aspirated 2.2l 5S-FE engine?

> > was there ever a 3sgte built July 1998 > March 2000 on a SW2# chassis?
simmo490
Posts: 3526
Joined: Sat Feb 19, 2005 6:19 pm
Location: FROME, SOMERSET

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by simmo490 »

you can plug it in, if it is the wrong one it will NOT start and will NOT burn anything out.

however if it does start you know its the right ecu but i wouldnt recomend running it untill itis mapped

simmo
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

OK. I plug it tonight.. And if it burns I send you simmo a repair bill... :lol: I get playing some electric god and find out those wires which came with the unit is from us st185... So I leave it alone...
simmo490
Posts: 3526
Joined: Sat Feb 19, 2005 6:19 pm
Location: FROME, SOMERSET

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by simmo490 »

:) it will be ok mate trust me
rameairo
Posts: 111
Joined: Sun Jul 29, 2007 9:42 pm
Location: Riihimaki,Finland

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by rameairo »

It starts and it didn't burn... \:D/
simmo490
Posts: 3526
Joined: Sat Feb 19, 2005 6:19 pm
Location: FROME, SOMERSET

Re: [Mk2] [Turbo] Which apexi PFC I got?

Post by simmo490 »

there you go, its all good now get it mapped properly
Post Reply

Return to “Electrical”