fitting a clutch!!!!!!

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
mase.1

fitting a clutch!!!!!!

Post by mase.1 »

hi all
i have a rev 1 turbo i need to change the clutch :cry: i was wondering if you have to drop the engine 1 side a little. Or after you have removed everything to get access (my mr2 cd for the computer helps!! :? ) can you do it all with just the front and rear engine mounts removed (not either side)

any help would be welcomed.

cheers shane



p.s i know there is a lot of other bits to remove but i just want to know if you have to drop the engine :? (cd does not help with that bit)
AM TUNING
Posts: 601
Joined: Tue Dec 14, 2004 5:33 pm
Location: aka andi , hastings

Re: fitting a clutch!!!!!!

Post by AM TUNING »

no dont drop the engine , remove the rear subframe that makes it easer,

ps get help lifting it , its dam heavy
stevel
Posts: 424
Joined: Tue Dec 14, 2004 7:56 pm
Location: Kettering

Re: fitting a clutch!!!!!!

Post by stevel »

Welcome

this question was raised earlier



http://www.imoc.co.uk/forums/viewtopic.php?t=199

hth
mase.1

Re: fitting a clutch!!!!!!

Post by mase.1 »

cheers andipandi
Post Reply

Return to “Mechanical”