Set of 4 genuine TRD Alumi-K wheels that fit a standard MR2 or can be spaced to fit a TRD bodied car.
Good tires but hubs themselves could do with a repaint plus one needs a new rubber grommet/seal around the valve.
Also optionally available a spare hub.
£1000 for all 4 or £1200 including spare hub.
Sizes
17 8.5 +46 (spare)
17 7.55 +30 x 2 (Front)
17 8.0 +39 x 2 (Rears)
NB you could but differnt barrels and lips to swap them to exact TRD size if you were really fussy
[FINALIZED] TRD Alumi-K Wheels 17" *** Reduced ***
Moderators: IMOC Moderators, IMOC Committee Members
TRD Alumi-K Wheels 17" *** Reduced ***
Last edited by JeffD on Sun Jul 07, 2019 6:25 pm, edited 1 time in total.
Re: [FINALIZED] TRD Alumi-K Wheels 17" *** Reduced ***
reduced to £900 for all 4 or £1,050 including spare hub.
-
- Posts: 41
- Joined: Sun Jun 19, 2016 6:43 pm
Re: [FINALIZED] TRD Alumi-K Wheels 17" *** Reduced ***
Also interested
Re: [FINALIZED] TRD Alumi-K Wheels 17" *** Reduced ***
All pms replied to.
BTW As an alternative to refurbing you can buy the inner and outer barrels to in effect change the size to make them "TRD size"
http://www.alloys-tyres-wheels.co.uk/pr ... eel-parts/
There's also a website in Germany which I forgotten the name of that does stainless lips which looks pretty close to chrome but without all the hard work of regular polishing.
Before my car got written off (wheels weren't on car at the time) I was going to split them apart myself and halve them powder coated with the barrel and middle in silver and the outer lips in a "chrome look" powder coat then you would have to polish them. I was quoted between 160-200 for all 4. Its pretty easy to do but just time consuming.
BTW As an alternative to refurbing you can buy the inner and outer barrels to in effect change the size to make them "TRD size"
http://www.alloys-tyres-wheels.co.uk/pr ... eel-parts/
There's also a website in Germany which I forgotten the name of that does stainless lips which looks pretty close to chrome but without all the hard work of regular polishing.
Before my car got written off (wheels weren't on car at the time) I was going to split them apart myself and halve them powder coated with the barrel and middle in silver and the outer lips in a "chrome look" powder coat then you would have to polish them. I was quoted between 160-200 for all 4. Its pretty easy to do but just time consuming.
-
- Posts: 6071
- Joined: Wed Dec 15, 2004 10:16 am
Re: [FINALIZED] TRD Alumi-K Wheels 17" *** Reduced ***
This Sale has been completed. The Buyer was spencerc