My fuel cap release pull works, However it doesnt return unless i wiggle he (10mm) i think nut holding the shaft.
How do i get access to the cable/other side of the nut, its as if its somewhere above the wheel arch.
hopefully im being stupid
[Mk2] [Turbo] Fuel Cap Release
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Fuel Cap Release
the cable runs from the lever, across the rear cabin wall to under the left window and then goes back there.
Can remove the trim below the window (where the speaker is) and gain access that way. Have to take the lower lid trims off too to get it out.
Can remove the trim below the window (where the speaker is) and gain access that way. Have to take the lower lid trims off too to get it out.
Re: [Mk2] [Turbo] Fuel Cap Release
pbmr2 wrote:the cable runs from the lever, across the rear cabin wall to under the left window and then goes back there.
Can remove the trim below the window (where the speaker is) and gain access that way. Have to take the lower lid trims off too to get it out.
great, ill take a look thanks.