TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Create a post with details about your car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
ashley
Posts: 7628
Joined: Tue May 13, 2008 8:08 pm

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by ashley »

Good stuff :clap:
craig
Posts: 43936
Joined: Sat Dec 18, 2004 3:44 am

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by craig »

Excellent work Rob :thumleft:

Seeing all the progress must have re-invested your interest in it, rather than just staring at a lump with a car cover over it!
androo007
Posts: 2363
Joined: Mon Mar 03, 2014 1:43 pm

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by androo007 »

Wahoo! Great to see this coming alive again Rob
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by C35Rob »

Cheers gents,

@craig, I still struggle for time/motivation but happy to chip away a little at a time.. averaging one day a month at the moment :lol: , I'm 99% certain I won't bother with tax/mot/insurance this year as there's not much point but that money can go towards making sure it is 100% ready to go for next spring
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by C35Rob »

I had a little time to myself on saturday so I hoovered out the inside of my daily driver and decided to swap the seat rails in the MR2

the seat came out no problem and I dropped the seat onto the bride rail, it fit like a glove obviously

Image

then I dropped the rail into the car and bolted it down, popped the seat in, threw the bolts in and sat in it.. legroom gained, yes.. but at the expense of losing a lot of headroom ](*,) enough that I could brace up in the seat and touch the roof with my head, whereas with the rogue fixed rail I had loads of headroom. I knew having a slider would lose a bit, but that was too much, it seems that my body, seat and rail combo weren't going to work.. it is a big seat and I am 6'2" though.

so out came the bride rail, I drilled the trans tunnel for an eye bolt and spreader plate as previously I had a Schroth clip in adapter fixed to the stud on the trans tunnel which isn't really ideal

Image

and I removed the schroth adapter from the other side and replaced the factory hex bolt with an eye bolt

having the harnesses that couple of inches further away (i.e fixing point closer to the floor) from the seat means the the adjuster buckles no longer come through the belt holes in the seat when the belt is done up which was quite annoying before.

I also managed to get another 20ish mm adjustment (one hole) on the rogue rail when it went back in, its at the very limit of it's rearward travel now but as it's on an angle, pushing the seat back also moves it down so I've gained enough legroom for me to now be 100% happy with the seating position, and still got enough headroom.

it certainly can't go back any further anyway

Image



anybody want a basically brand new bride sliding rail? :lol:
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
Race Idiot
Posts: 2589
Joined: Wed Jan 25, 2006 10:48 pm
Location: Hertfordshire

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by Race Idiot »

What bride rail did you use?

I bought the FG ones which are the lowest sidemount ones they make.

http://bride-jp.com/en/seatrail/fg/
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by C35Rob »

Race Idiot wrote:What bride rail did you use?

I bought the FG ones which are the lowest sidemount ones they make.

http://bride-jp.com/en/seatrail/fg/


It's a Bride XL rail, part number T049XL, the only one they do which is wide enough for my seat, although it's the same base/slider as most of their other rails (the RO) but with wider side mounts.
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by C35Rob »

time to move on to pastures new, see my breaking thread

http://www.imoc.co.uk/forums/viewtopic.php?t=193071
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
thomp1983
Posts: 1545
Joined: Sat Oct 01, 2011 1:30 pm
Location: newark, notts

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by thomp1983 »

Sad to see you go Rob, some of the engineering you've shown on your build has been outstanding.

More importantly, what bike you getting?
C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: TOM'S 96 Rev 3 GTS - BREAK ME UP, BEFORE YOU GO GO

Post by C35Rob »

thomp1983 wrote:Sad to see you go Rob, some of the engineering you've shown on your build has been outstanding.

More importantly, what bike you getting?


Thanks mate, I'll probably still pop in here for a read, I've had a look about and bike forums seem totally dead.

I'm after a 93-98 YZF750R, ideally in the white/pink/blue colour scheme.
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
Post Reply

Return to “Member Profiles”