Good news,
Opie Oils![](./images/smilies/spacer.gif)
have extended the range of performance air filters available with the addition of
Pipercross.![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![Image](http://www.opieoils.co.uk/images/upload/pipercrossimage.jpg)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
The Pipercross range
NOW![](./images/smilies/spacer.gif)
available at Opie Oils includes:
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Replacement Air Filters![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Find the correct
Pipercross panel filter here
>
>
>
![](./images/smilies/spacer.gif)
A Pipercross panel filter will provide the simplest, most effective entry point into the range and fully utilises the Pipercross layered multi-density foam technology and lifetime construction.
![](./images/smilies/spacer.gif)
These filters can be cleaned and re-used year after year, Opie Oils stock the
Pipercross cleaning products![](./images/smilies/spacer.gif)
too, you can find them
here
>
>
>
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Induction Kits![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Use our
Pipercross Induction Kit lookup here
>
>
>![](./images/smilies/spacer.gif)
Pipercross Induction Systems remove the restrictive factory airbox to offer the maximum possible airflow into the engine.
![](./images/smilies/spacer.gif)
All filters use Pipercross composite airflow technology and systems are only released for production when they are bench-flow tested and make an improvement in airflow performance.
![](./images/smilies/spacer.gif)
We also stock the Pipercross Viper Induction Kits which are the top level induction kit from Pipercross.
![](./images/smilies/spacer.gif)
Viper Induction Kits replace the original restrictive paper air filter and airbox with a high performance, carbon fibre sealed airbox.
![](./images/smilies/spacer.gif)
The carbon heat shield is bonded directly to a 150mm polished alloy rampipe to greatly increase laminar air flow within the filter, and maximise power.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Universal Filters![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Prices from
![](./images/smilies/spacer.gif)
£17.21![](./images/smilies/spacer.gif)
before members discount
Over 70 universal Pipercross filters available at Opie Oils, prices start at just
![](./images/smilies/spacer.gif)
£17.21 before members 10% discount!
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Venom Air Intake Kits![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Prices start from
![](./images/smilies/spacer.gif)
£125.21![](./images/smilies/spacer.gif)
before members discount
The all-new Pipercross Venom Air Intake incorporates a new double-conical air filter design to increase surface area by over 40% when compared to a standard shaped cone.
![](./images/smilies/spacer.gif)
The double-conical filter gives the New Pipercross Venom the largest surface area of any aftermarket enclosed intake system of this type available today.
![](./images/smilies/spacer.gif)
Increased maximum air flow and low restriction for any given volume of air flow and increased dust capacity means less servicing is required.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Cold Air Feed Kits
/ Pipers![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Prices start from
![](./images/smilies/spacer.gif)
£25.52![](./images/smilies/spacer.gif)
before 10% members discount
Pipercross cold air feed kits supply cold air from the front grill/bumper straight to your induction kit.
![](./images/smilies/spacer.gif)
Giving maximum power and enhancing the look of your engine bay.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross Crank Case Breather Filters![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Prices start from
![](./images/smilies/spacer.gif)
£20.39![](./images/smilies/spacer.gif)
before members discount.
![](./images/smilies/spacer.gif)
Crank case breather filters are designed to prevent contaminated oil vapour from entering back into the engine.
![](./images/smilies/spacer.gif)
To be attached directly onto your existing crank case breather hose, the foam filter inside the case is resistant to chemical erosion.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross PX300 Single Carb Series![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
- Baseplates and filters
Designed for road and competition single carbs, the PX300 consists of a lightweight ring plate bonded to a high performance air filter element.
![](./images/smilies/spacer.gif)
The element is made from reticulated foam in a triple layer laminate, with the filter being supported internally by a metal cage.
![](./images/smilies/spacer.gif)
The PX300 is designed for use on a large range of carburettors as the baseplates are ordered separately to ensure the best combinations for your engine.
![](./images/smilies/spacer.gif)
When ordering elements, Pipercross advise to fit the largest possible, allowing a 19mm gap between the trumpet mouth or carb face and the inner face of the filter.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross PX400 Formula Ford Series![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
The ultimate filter for Formula Ford and Superstocks.
![](./images/smilies/spacer.gif)
Available as a lightweight throw away filter, designed to be changed at every engine build.
![](./images/smilies/spacer.gif)
Can also be fitted on any car using a Weber carburettor DGAV, DGV, DGAR, etc.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Pipercross PX500 Small Twin Carb Series![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
The PX500 range of filters is developed for twin carburettors but in a compact design for applications where space can cause an issue e.g.
![](./images/smilies/spacer.gif)
Motorcycles, MG Midget, Metro, Mini etc.
![](./images/smilies/spacer.gif)
The range consists of a filter unit which utilises the Pipercross competition foam, bonded to a ring plate.
![](./images/smilies/spacer.gif)
This ring plate can be attached
![](./images/smilies/spacer.gif)
(using the supplied DZUS fasteners) to either a tailored base plate or a blank base plate so you can cut the holes to suit your application.
![](./images/smilies/spacer.gif)
Remember to leave at least 20mm between the end of the trumpet/carburettor inlet and the inside of the filter.
![](./images/smilies/spacer.gif)
-
![](./images/smilies/spacer.gif)
Plus a range of Pipercross Accessories![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Pipercross accessories available at Opie Oils include filter servicing kits and Alloy Ram Piper trumpets.
![](./images/smilies/spacer.gif)
Together with
Pipercross![](./images/smilies/spacer.gif)
and
K&N![](./images/smilies/spacer.gif)
, Opie Oils now offer an extensive range of performance air filters.
![](./images/smilies/spacer.gif)
If you have any questions regarding Pipercross or other any product we stock then give us a call on 01209 202949, drop us an email to
[email protected] or just ask us on the forum and we will be happy to help.
![](./images/smilies/spacer.gif)
- Opie Oils