Manifold to down pipe gasket

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
firebobby
Posts: 37
Joined: Sun Jan 11, 2015 12:09 pm
Location: South Bucks

Manifold to down pipe gasket

Post by firebobby »

I am fitting a new to me down pipe to my rev 3 NA. I want to fit new gaskets, so need to know where I can get them from.
I need the top one which has 3 bolt holes and is a twin pipe. And the one that goes to the cat, 2 bolts and a single pipe.
Any info greatly received.
John
Juliuswws
Posts: 143
Joined: Thu Sep 20, 2012 7:32 am
Location: Ireland

Re: Manifold to down pipe gasket

Post by Juliuswws »

firebobby wrote:I am fitting a new to me down pipe to my rev 3 NA. I want to fit new gaskets, so need to know where I can get them from.
I need the top one which has 3 bolt holes and is a twin pipe. And the one that goes to the cat, 2 bolts and a single pipe.
Any info greatly received.
John


Hey mate,

You need 2x 90917-06075 and 1x 90917-06054 or 90917-06057.

I would ask your nearest Toyota dealership, these are usually not too expensive.

Cheers
firebobby
Posts: 37
Joined: Sun Jan 11, 2015 12:09 pm
Location: South Bucks

Re: Manifold to down pipe gasket

Post by firebobby »

Thank you for the info, it good to be able to put part numbers to bits and bobs.
:D
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”