This forum has been retired as of 22/Aug/2021. All threads are locked. Existing users cannot log in and new users cannot register.
It remains here for posterity, and so that old links still lead to content instead of an error message.
All forum threads were migrated to the new forum. Clicking to view a thread on this forum will take you to the same thread on the new forum.
DescriptionHow to replace a broken bulb in the rear light units on the rev3+ AuthorJohnnyCDateTue Sep 02, 2008 11:39 pmTypePicture How-To CategoryMR2 Mk2 Articles Views 3434
Changing a rear bulb (rev3+) How to replace a broken bulb in the rear light units on the rev3+
Tools required:
Cross-headed screwdriver.
Flat knife or similar.
The replacement bulb (in this instance, a standard '380' dual filament brake light).
In case any of your old clips have become broken, here's the part number.
The rear before we start.
My tool for removing the corner unit of the light.
Cover the flat tool with paper, thick tissue or similar to help protect the plastic of the corner unit and lights. Insert the tool just behind the corner unit as shown and pry it out carefully.
Now you will see 2 screws, remove these.
With the rear boot lid open, remove the final screw shown.
Carefully pull the light unit towards you. You now have access to the rear lights.
Once the bulb is replaced, simply put everything back together in reverse order.
Album
Calendar
FAQ
Search
Memberlist
1/4 Mile Table
Register
Premium Membership
Profile
Log in to check private messages
Calendar 
