This forum has been retired as of 22/Aug/2021. All threads are locked. Existing users cannot log in and new users cannot register.
It remains here for posterity, and so that old links still lead to content instead of an error message.
All forum threads were migrated to the new forum. Clicking to view a thread on this forum will take you to the same thread on the new forum.
DescriptionSource of alternative droplinks for the MR2 AuthorGoldyDateWed Feb 01, 2006 10:56 pmTypeTechnical Information CategorySuspension Views 11394
Alternative ARB Drop Links Source of alternative droplinks for the MR2
Droplinks for the MR2 :
Alternatives to paying ''' for toyota parts or dodgy parts off ebay.
(To fit the front of the car)
QLS3308S - Rear BMW mini link arms - 10.04+vat each
(To Fit the rear of the car)
FDL6447 - Front Volvo S40 (96) arms (the Mitsubishi Carisma also has the same part) - 13.68+vat each
alternatively vauxhall cartlon droplinks (to fit rear) part number : 90334075 around '10 each from motor factors. These will require the mounting holes in the ARB and strut drilling out to 12mm
User comments
Leon.: Wed Feb 25, 2009 7:34 pm
To add to this, if you have Tein coilover suspension, you will be able to replace the fronts with Toyota Avensis drop links without any modifications. They are around 2" shorter than the Teins so any ride height should be fine. They are opposite facing like Teins. From ADL, the product code is ADT38546 and around �20 a side from a motor factors.
Note that although the spindle diameter is the same as stock, the thread isn't, so make sure you have a 17mm spanner to hand as that's the size of nut they come with!
Album
Calendar
FAQ
Search
Memberlist
1/4 Mile Table
Register
Premium Membership
Profile
Log in to check private messages
Calendar 
