This forum has been retired as of 22/Aug/2021. All threads are locked. Existing users cannot log in and new users cannot register.
It remains here for posterity, and so that old links still lead to content instead of an error message.
All forum threads were migrated to the new forum. Clicking to view a thread on this forum will take you to the same thread on the new forum.
ATSAaron -> Wheels are 17x8 front and 17x9 rear. Offsets are 40mm. Tires are 215/40R17 fr and 255/40R17 rear
ATSAaron -> Kaaz LSD is set too stiff out of the box. We had to remove the trans after installation and repack the clutches to 33% lockup (factory setting it 100%).
DaveMPB -> Dam knock sensor!!!!
-> ATS Engle valve springs.
60 lbs closed.
110 lbs open.
fitment is not perfect as 2 of my valve springs needed a minor grinding job. but they are not expensive at all , and probarly the same as hks will sell you.
-> ats racing cv joints , just because stockers will defenitly break
PFrazier -> By boring the stock fuel rail and opening up the fuel inlets and outlets we are able to increase the volume of fuel immediately available to the injectors by over 70% Our rails support up to 360 wheel horsepower when combined with the ATS Fuel Pressure Regulator Modification and 550cc injectors.
Album
Calendar
FAQ
Search
Memberlist
1/4 Mile Table
Register
Premium Membership
Profile
Log in to check private messages
Calendar 