This forum has been retired as of 22/Aug/2021. All threads are locked. Existing users cannot log in and new users cannot register.
It remains here for posterity, and so that old links still lead to content instead of an error message.
All forum threads were migrated to the new forum. Clicking to view a thread on this forum will take you to the same thread on the new forum.
Grant -> I had noticed a lot of MR2 owners install there Amps into a shelf under the bonnet to save space and also for show purposes. As I did not have any Amps or Subs in my car I decided that I would make a board and use Neon string and make the word MR2.
I firstly used a large piece of cardboard for the template then used this template for cutting my wood. Once the wood was cut and I made sure it fitted I then carpeted the board. Once carpeted I printed the letters/number M, R, 2 onto 3 A4 sheets of paper. using the correct font. I laid these sheets of paper onto the board then hammered nails into each corner of every letter. Once all the nails were in places I removed the paper and had a template to wrap the neon string around.
Once the neon string was in place I used superglue to stick the string onto the board. Once complete I then wired the neon string to my existing neon setup then mounted the board under the bonnet.
Andy K -> Bought a Rev 3 Turbo rear cut for �750, and fitted it's engine after a full cambelt service to my engine bay.
see :http://www.imoc.co.uk/forums/kb.php?mode=article&k=55
Andy K -> secret
Dangerous -> The polishing was done while the engine was in bits.......(its a long storey) my mate did them for �50....... They looked superb when they were done 2yrs ago, but now they are looking a little weather'd (the rain just soaks them and its a real pain to keep clean.........)
-> Bought of a neighbour for �40, result!!
johnwoo -> Fuelcut set at approx. 16 psi
ldavies83 -> Taken off my previous car and it fitted like a glove onto the '2! Sounds fantastic!
Lauren -> Intercooler ducting enabling the intercooler to be isolated from hot air in the engine bay.
Scotster -> Center console along with a few other bits and bobs painted same colour as car.
matt_bakermk1 -> Self made, but bought carpet and grille to finish.
Album
Calendar
FAQ
Search
Memberlist
1/4 Mile Table
Register
Premium Membership
Profile
Log in to check private messages
Calendar 