|
|
|
1991 Toyota MR2 Mk2 NA Rev1 |
|
|
|
Modification |
'MR2' Neon Board |
Category |
Exterior |
Vehicle |
1991 Toyota MR2 Mk2 NA Rev1 |
Updated |
Fri Jun 24, 2005 6:24 pm |
Purchased From |
Self Made |
Purchased Price |
60 GBP |
Product Rating |
10 |
Installed By |
Self Install |
Installation Price |
0 GBP |
Installation Rating |
10 |
Comments |
I had noticed a lot of MR2 owners install there Amps into a shelf under the bonnet to save space and also for show purposes. As I did not have any Amps or Subs in my car I decided that I would make a board and use Neon string and make the word MR2.
I firstly used a large piece of cardboard for the template then used this template for cutting my wood. Once the wood was cut and I made sure it fitted I then carpeted the board. Once carpeted I printed the letters/number M, R, 2 onto 3 A4 sheets of paper. using the correct font. I laid these sheets of paper onto the board then hammered nails into each corner of every letter. Once all the nails were in places I removed the paper and had a template to wrap the neon string around.
Once the neon string was in place I used superglue to stick the string onto the board. Once complete I then wired the neon string to my existing neon setup then mounted the board under the bonnet. |
Install Comments |
|
|
|
Powered by phpBB © 2001, 2005 phpBB Group
|