Changing a rear bulb (rev3+)

Description:

Categories: MR2 Mk2 Articles

Link to this article: Select all

[url=https://www.imoc.co.uk/app.php/kb/viewarticle?a=127&sid=607c7db06417afc72e2c1d7d2abba6b2]Knowledge Base - Changing a rear bulb (rev3+)[/url]

Tools required:
Cross-headed screwdriver.
Flat knife or similar.


The replacement bulb (in this instance, a standard ‘380’ dual filament brake light).
Image

In case any of your old clips have become broken, here’s the part number.
Image

The rear before we start.
Image

My tool for removing the corner unit of the light.
Image

Cover the flat tool with paper, thick tissue or similar to help protect the plastic of the corner unit and lights. Insert the tool just behind the corner unit as shown and pry it out carefully.
Image

Now you will see 2 screws, remove these.
Image

With the rear boot lid open, remove the final screw shown.
Image

Carefully pull the light unit towards you. You now have access to the rear lights.
Image

Once the bulb is replaced, simply put everything back together in reverse order.