Cheers
Bry
![](./images/smilies/spacer.gif)
![Cool 8)](./images/smilies/icon_cool.gif)
Moderators: IMOC Moderators, IMOC Committee Members
Bry wrote:Hi could anyone tell me the torque settings for the headbolts on a 20 valve 4age and the camshaft caps
Cheers
Bry![]()
dr_wilkinson wrote:Bry wrote:Hi could anyone tell me the torque settings for the headbolts on a 20 valve 4age and the camshaft caps
Cheers
Bry![]()
Bry
There's a workshop manual for the 20v(albeit for the blacktop) floating around online in pdf format that's very useful.
![]()
Handily for me I was still an employee at the time I found it so I made good use of work time by printing the whole thing out and binding it!
Wouldn't do it now I'd be paying the printing costs
![]()
I've just had a quick look online and can't find it immediately, but that's not to say it's not available if you have time to dig around a bit more.
I'll check out the torque settings this evening and let you know.![]()
If you have an ftp space where you'd like me to upload the pdf to
(this applies to anyone else who wants a copy!) then send me a PM.
Rich
dr_wilkinson wrote:Bry
The camshaft caps are 13lbft(17Nm)
Head bolts are 22lbft(30 Nm)
+90
+90
Tightening order
8![]()
4
2
5
9
106
1
3
7
I'll send you a PM with link to the manual later on..
.
Rich