[Mk2] [Generic] Fitting power steering rack pinion from Roadster

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
tiff_lee
Posts: 384
Joined: Thu Jun 04, 2015 2:18 pm

[Mk2] [Generic] Fitting power steering rack pinion from Roadster

Post by tiff_lee »

As per title has anyone fitted the pinion/valve assembly from a roadster into a Mk2 rack? reason being the Mk2 has 6 teeth and mk3 has 7.

Couple of reference threads here

http://www.mr2oc.com/6-mkii-90-99-na-tu ... stall.html

http://www.mr2.com/forums/threads/94365 ... ering-Gear

I'm currently rebuilding my rack at the minute and giving this a go. Only problem i've noticed and something that isn't mentioned in those threads (perhaps different on LHD?) is the diameter of the pinion shaft is smaller so i'll need to sleeve my rack to fit one.
Post Reply

Return to “Mechanical”