[FINALIZED] Rev2 Turbo Fields ECU

Parts for the Mk2 MR2 only (excluding bodywork and wheels/tyres)

Moderators: IMOC Moderators, IMOC Committee Members

Locked
killerferret666
Posts: 659
Joined: Thu Jul 26, 2012 8:00 am

Rev2 Turbo Fields ECU

Post by killerferret666 »

I have switched from a rev2 engine to forged engine and rev3 wiring hence this is now available.

£275 + Postage

* Removes or raises fuel cut (I was running 1 bar)
* Raises rev limiter - Cant tell you by how much I'm not that brave!
* Removes speed limiter
* Photo showing capacitors in good health


Ive run it on a ct26 and CT20b with no issues. The response was always good, I cant say for sure if it has an improved ignition and fuel map but either way the car did always seem fast and respond well.

Image

Image

Image


At first I couldn't tell what had changed as normally there is a slave board or something and it looked quite stock, but then from the human soldering I could see the main chip had been changed. You can see the difference.

Image
My Blog on Miami GT4 kit car build using MR2 Donor Car

http://miamigt4kitcar.blogspot.co.uk/

twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
jon
Posts: 341
Joined: Tue Dec 14, 2004 10:23 am
Location: Cambridge

Re: [FINALIZED] Rev2 Turbo Fields ECU

Post by jon »

If the part number on the main chip is D151802-9361 then that's the normal part.

I'd suggest that at some point in the past it has had a daughterboard fitted but for some reason it has been removed and the main chip re-soldered back into position.
killerferret666
Posts: 659
Joined: Thu Jul 26, 2012 8:00 am

Re: [FINALIZED] Rev2 Turbo Fields ECU

Post by killerferret666 »

jon wrote:If the part number on the main chip is D151802-9361 then that's the normal part.

I'd suggest that at some point in the past it has had a daughterboard fitted but for some reason it has been removed and the main chip re-soldered back into position.


cheers Jon, ill check it out.

Bit weird never hitting fuel cut on rev 2 at 1bar though isnt it?
My Blog on Miami GT4 kit car build using MR2 Donor Car

http://miamigt4kitcar.blogspot.co.uk/

twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
spencerc
Posts: 64
Joined: Wed Jun 25, 2014 6:37 am
Location: Buckinghamshire

Re: [FINALIZED] Rev2 Turbo Fields ECU

Post by spencerc »

Image

this is my Avance ecu, I don't know anything about modded ecu's but this looks vastly different,
killerferret666
Posts: 659
Joined: Thu Jul 26, 2012 8:00 am

Re: [FINALIZED] Rev2 Turbo Fields ECU

Post by killerferret666 »

thanks Guys, ill sell this as a normal Rev2 ECU I think.

If its not someone gets a bonus :thumleft:
My Blog on Miami GT4 kit car build using MR2 Donor Car

http://miamigt4kitcar.blogspot.co.uk/

twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
Feedback Bot
Posts: 6071
Joined: Wed Dec 15, 2004 10:16 am

Re: [FINALIZED] Rev2 Turbo Fields ECU

Post by Feedback Bot »

This Sale has been completed. The Buyer was None
Locked

Return to “Mk2”