HT Lead resistance values (what's good??)

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Caleb-mr2
Posts: 108
Joined: Mon Jul 04, 2011 5:38 pm
Location: N.Ireland

HT Lead resistance values (what's good??)

Post by Caleb-mr2 »

Hi,

I checked the resistance of my ht leads today using a multimeter on the 20k ohms setting.

All four wires from the distributor to the engine read between 1.98 and 2.0 regardless of length.

The king lead from coil to distributor was 0.98

Are these readings good or what should they be??

Thanks.
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”