CV JOINT/ DRIVE SHAFT

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Tackleberry75
Posts: 4
Joined: Thu Feb 09, 2017 3:28 am

CV JOINT/ DRIVE SHAFT

Post by Tackleberry75 »

Gi guys . Can anyone recommend where on this earth i can source a 3sgte drive shaft . Or just the cv joint .
Top
[email protected]
Posts: 106
Joined: Fri Apr 29, 2016 10:33 pm

Re: CV JOINT/ DRIVE SHAFT

Post by [email protected] »

I got a pair of 3sge ones. No idea if they are compatible
Top
Marty J
Posts: 349
Joined: Thu Oct 26, 2006 5:49 pm

Re: CV JOINT/ DRIVE SHAFT

Post by Marty J »

If you have abs then you need a cv joint with the abs tone/reluctor ring installed. Otherwise you'll have to re-install your old abs ring.
Top
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”