[Mk2] [Generic] JDM fog light wiring - deleting external fog

Anything to do with the electrics of the car.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Racer7
Posts: 536
Joined: Mon Aug 20, 2007 6:22 pm
Location: SW London

[Mk2] [Generic] JDM fog light wiring - deleting external fog

Post by Racer7 »

Hello,

I'm about to do the fog light within the existing brake lights mod.

So that is the two inners act as a fog when switched on from the cabin and stay on. The two outers then work as the brake lights.

Conversely when the switch is off all four act as brake lights.

I've seen the wiring diagram from the legendary Stef Derner. But I'm still a bit nervous to hack things up.

In my case, all four lights act as a brake light. I previously had an aftermarket fog light on the grill. This broke and so I want to absorb it into the cluster. So I already have some existing wiring.

So can some more proficient of you or those who have done this check my image below at what my understanding is and/or elaborate on what needs doing?

Image

As always - thanks in-advance! I'm itching to get my turbo back on the road after more than two years!
Post Reply

Return to “Electrical”