Mk2 NA revving problem

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
nige07

Mk2 NA revving problem

Post by nige07 »

had a very intermittent revving problem which has now manifested into
something not good at all
the car starts and idles Ok, but as soon as i press the go pedal nothing
happens after 1500 rpm apart from a funny smell.
It sounds as though it's missing, but as I said, it ticks over with no
problem.
It seems as though something is blocked, but I've no idea where to start.
Thoughts or suggestions please
chrisbilling

Re: Mk2 NA revving problem

Post by chrisbilling »

Good place to start is to interogate the ECU for any stored fault codes.

short E1 to TE1 in diagnostic connector and turn on but do not start car
Check number flashes of the ECU icon on left side of indtrument cluster.

This will falsh with fault code eg:

3 flashes pause 4 flashes = 34

Regards,
Chris
Frustrated Pilot
Posts: 2244
Joined: Thu Dec 16, 2004 12:59 pm
Location: SURREY
Contact:

Re: Mk2 NA revving problem

Post by Frustrated Pilot »

http://ekg262.pwp.blueyonder.co.uk/MR2/MR2ECU.htm

my site tells ya how to do it...

BUT!!!! for an NA... the codes are different.. so ask me i will look it up in me BGB. thats blue...
Post Reply

Return to “Mechanical”