Toyota 3sge Revision 3 ACIS Spacer Group Buy

Forum For IMOC Group Buys

Moderators: IMOC Moderators, IMOC Committee Members

HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

Had some interest in this from a few people so thought I would see if there was enough interest to start a group buy as a first batch.

Our 25 mm CNC machined spacer made from aircraft grade aluminium, gold anodised. Comes complete with new bolts and, genuine toyota ACIS gasket.

Here's a pic of one fitted to our engine in our race car.

Image

Picture without cover on can also be seen on our website

Image

http://www.hurleyraceengineering.co.uk/page4.htm

Prices

single unit kit - £159.99
2 - 3 units - £150
4- 7 units - £140
8 - 14 units - £135
15 plus - £130

Postage will be 7 pounds to a uk address,

Group buy will run until 30th September, please PM to be part of it and I will update a list . Once the buyers are finalised and cost is determined i will need a 50% deposit by Paypal from each buyer before I manufacture the batch . The Other half to be paid once the batch is ready.
Last edited by HurleyRacing on Fri Aug 16, 2013 9:01 pm, edited 1 time in total.
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
matt-mr2
Posts: 1259
Joined: Sat Apr 24, 2010 6:33 pm
Location: barnsley

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by matt-mr2 »

I'm in :thumleft:

1. Matt-mr2

Does it come with the decal
Last edited by matt-mr2 on Fri Aug 16, 2013 6:41 pm, edited 1 time in total.
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

Well you would use your own top cover but yes I can provide the Gold Decals for it :)
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
Ryan6926
Posts: 475
Joined: Sat May 11, 2013 2:50 pm

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by Ryan6926 »

I don't need one myself as I already have one but for anyone interested, these really are great bits of kit :)
Last edited by Ryan6926 on Fri Aug 16, 2013 8:30 pm, edited 1 time in total.
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

\:D/
Last edited by HurleyRacing on Fri Aug 16, 2013 8:37 pm, edited 1 time in total.
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
Lee8ballauto
Posts: 237
Joined: Wed Jul 14, 2010 1:17 pm

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by Lee8ballauto »

Ah I want one :( what's the benifits of it? I was looking at the kamikaze ones ages ago but nobody really knew the benifits
Ryan6926
Posts: 475
Joined: Sat May 11, 2013 2:50 pm

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by Ryan6926 »

Lee8ballauto wrote:Ah I want one :( what's the benifits of it? I was looking at the kamikaze ones ages ago but nobody really knew the benifits


The main benefit is that it add's more torque which is handy on the Rev 3. I had one and noticed an increase from 2k rpm where it felt noticeably quicker,

In addition upon putting the car on a dyno I also found my car was still making power at the rev limiter as opposed to another GT which was standard which peaked around 7k
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

yep, what ryan said.

taken from our website.

''The HRE ACIS Volume Plate increases torque at acis change over by changing the acoustic signal and providing a larger chamber of air to draw upon, which in turn increases power, typical gains 3-7 bhp on an engine in good Condition. Works especially well on engines running fast road cams with a greater overlap than standard''
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
Davsurfa
Posts: 193
Joined: Sun Jun 23, 2013 6:47 pm
Location: Northants

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by Davsurfa »

Can I just ask how come you make them at 25mm? I'm just curious to height choice
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

Sure...two reasons really. its what we felt was right for the engine,( using experience from other similar engines) and the fact that the majority of people will have standard cams or fast road cams.

Also it's a stock material size. Therefore eliminating wastage and keeping cost down. Can make them any size you like however cost will vary.
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
synXero
Posts: 3781
Joined: Fri May 28, 2010 12:04 pm
Location: London, Edinburgh, or the Highlands!

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by synXero »

Does this mod work on most engines?

There must be some kind of trade off between the increased air and thus power and torque, and something else? Why don't cars come with enlarged plenums from the factory?

Would it work as well/better/worse on a larger engine? An 8 cylinder?
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

It depends on what the engines acis type system/ plenum are like and how well they breathe to start with.

With any modification to any engine there is nearly always a trade off, whether it be induction noise, fuel economy , engine bay/ bonnet restrictions, cost to the manufacturer etc. These are all reasons as to why manufacturers do the things they do. The same question could be asked about free flowing exhaust manifolds etc

As to a v8 again it depends on the engine. All engines are effectively air pumps, so to increase power you have to have better breathing, more air or turn it faster , more revs.
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

We now have two down so far for the group buy.

1 matt-mr2
2 Kevin ( non imoc)
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
RikH77
Posts: 1407
Joined: Thu Nov 24, 2011 8:39 pm
Location: West Yorkshire

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by RikH77 »

Work on a rev5, stock engine. Gasket wise do you supply one for top and bottom of spacer?
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

yep works as same chamber as rev 3, supplied is a single gasket. if your existing one needs changing we can supply another at cost however not included in the kit
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
tezmc
Posts: 76
Joined: Sun Apr 21, 2013 11:40 pm
Location: Manchester

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by tezmc »

I'd be interested if it gives the same gains on a Rev5. What could I expect with a standard cam? Also, how much would an additional gasket be?

Cheers
Donato
Posts: 1262
Joined: Tue Oct 02, 2012 10:58 am
Location: Bolton

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by Donato »

I have just fitted a ACIS spacer / power deck spacer. Made a bit of difference low - mid in torque. Slight bhp gain i think. But definitely noticeable and i'd recommend buying one!
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

I would expect the same gains from rev 5, off the top of my head don't know exactly how much the gasket is, I have it somewhere and will drop you a PM when I'm back in the office, away racing this weekend now so won't be til Monday / Tues
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

Acis Gaskets are about a tenner from Mr T i believe.
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
HurleyRacing
Posts: 220
Joined: Wed Apr 13, 2011 8:50 am
Location: Cambridgeshire
Contact:

Re: Toyota 3sge Revision 3 ACIS Spacer Group Buy

Post by HurleyRacing »

We have one more down for the group buy - One more person and we will be down to the next discount level.

1) matt-mr2
2) Kevin ( non imoc)
3) tezmc
-Race Car Preperation -Engine Rebuilds
www.hurleyraceengineering.co.uk
[email protected]
Post Reply

Return to “Group Buys - MR2 related”