It looks like i just got a new turbo to go with the greddy intercooler ive got sitting in my garage. This plus a downpipe, mongoose, induction kit and 16psi, i cant be far off, can i??????
mark im after you.
Joining the 300bHP club??
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 1870
- Joined: Wed Dec 15, 2004 3:27 pm
- Location: Uckfield
Re: Joining the 300bHP club??
think you will be running out of fuel at 300hp,i don't think the standard ct26 can support more than 280ish.
Re: Joining the 300bHP club??
I was running a ct26 at 16psi, with greddy i/c ,decat , departure exhaust, and a k & N filter. Car was at around 270BHP at that point. As ryan says you'll be running the injectors close to max on rev1/2 to get to 3000bhp. What turbo is it?
-
- Posts: 1870
- Joined: Wed Dec 15, 2004 3:27 pm
- Location: Uckfield
Re: Joining the 300bHP club??
its a blitz ct26. Quite a few people are running over 300bhp on standard injectors, but i know they will be on the limit. I will get it RR'd when fitted and see how they are coping.
Re: Joining the 300bHP club??
nutter wrote: you'll be running the injectors close to max on rev1/2 to get to 3000bhp.
3000bhp, thats impressive
Re: Joining the 300bHP club??
he he 3000bhp. Yes it is possible the standard injectors will be near max duty cycle at that level . Oops my bad
-
- Posts: 11298
- Joined: Wed Dec 15, 2004 9:27 am
- Location: Eastbourne
- Contact:
Re: Joining the 300bHP club??
Hi Norris, i hope you will enjoy your new toy
300bhp is possible whit standard fuel, watch out for the injector duty cycle, or fuel pressure, but the best woud be to borow a wideband (the downpipe i supply has a wideband port) and see for yourself.
300whp is another questions, that is pushing the limits, and won't call it safe.
If you will get an emanage (i can not fully recomend it) or Unichip, then you will be able to bump up the fuel pressure, to gain some more fuel to the injectors, BUT please modify your fuel rail to dual or center feed!
SMT6 getting popular nowdays, cheaper then emanage and it has more options, you might take a look! SMT7 has mindblowing features, but it does not work whit 3sgte yet.
300bhp is possible whit standard fuel, watch out for the injector duty cycle, or fuel pressure, but the best woud be to borow a wideband (the downpipe i supply has a wideband port) and see for yourself.
300whp is another questions, that is pushing the limits, and won't call it safe.
If you will get an emanage (i can not fully recomend it) or Unichip, then you will be able to bump up the fuel pressure, to gain some more fuel to the injectors, BUT please modify your fuel rail to dual or center feed!
SMT6 getting popular nowdays, cheaper then emanage and it has more options, you might take a look! SMT7 has mindblowing features, but it does not work whit 3sgte yet.
Re: Joining the 300bHP club??
It isn't so much the fueling won't allow you it's the CT26 that's the bigger restriction, even high flowed ct26's take a bit to get there.
Cheers
KiwiMR2
Cheers
KiwiMR2
Re: Joining the 300bHP club??
If his car was around 270 on standard Ct26, then the blitz unit will take it there for sure.
Re: Joining the 300bHP club??
Tilus wrote:If his car was around 270 on standard Ct26, then the blitz unit will take it there for sure.
Oh, didn't realise there was a Blitz unit going in, thought he just meant a new cleaned up standard CT26....my bad
Cheers
KiwiMR2
-
- Posts: 11298
- Joined: Wed Dec 15, 2004 9:27 am
- Location: Eastbourne
- Contact:
Re: Joining the 300bHP club??
It's me he's chasing, I'm using a turbo technics hybrid ct26 with a st205 CC running 1.2kg/cm2 to get 310bhp using stock injectors and stock ecu (and have the 1/4 mile times to back it up). Fueling for 300bhp isn't an issue, it's the AFM that can be. I've been lucky and managed it, hopefully for him, Lee will manage it too.
Re: Joining the 300bHP club??
What is your 1/4 mile?
I had 14.4 on an unprepared track, whit shitty street tires whit the CT26, and 13.4 whit the Blitz CT26S on the same track. 60 feet was a wery bad 2.0s in both cases.
I had apexi intake, costum exhaust and downpipe, copper plugs, 15psi, stock ecu, stock injectors, and stock intercooler.
Next time i'll be back to the same track whit SMT6 and 550's running 18psi on a GT32, and a chargecooler, will see! I am worried about lag and the clutch now
I had 14.4 on an unprepared track, whit shitty street tires whit the CT26, and 13.4 whit the Blitz CT26S on the same track. 60 feet was a wery bad 2.0s in both cases.
I had apexi intake, costum exhaust and downpipe, copper plugs, 15psi, stock ecu, stock injectors, and stock intercooler.
Next time i'll be back to the same track whit SMT6 and 550's running 18psi on a GT32, and a chargecooler, will see! I am worried about lag and the clutch now
Re: Joining the 300bHP club??
I've had 13.09 on the standard ct26 on 16psi, with greddy i/c, decat etc. Sorry for butting in but i was pretty proud of that time
Re: Joining the 300bHP club??
Thats an excellent time!
Our track is a pita, has no tracktion at all, what is your 60 foot? i am sure it is down low at 1.6 or 1.7!
Our track is a pita, has no tracktion at all, what is your 60 foot? i am sure it is down low at 1.6 or 1.7!
-
- Posts: 1870
- Joined: Wed Dec 15, 2004 3:27 pm
- Location: Uckfield
Re: Joining the 300bHP club??
I just dont want mark coming past me like im i a Nova
Actually to be honest i want to kick his ar$e, but ill settle for keeping up.
Actually to be honest i want to kick his ar$e, but ill settle for keeping up.
Re: Joining the 300bHP club??
Damn there's some good times there!! One of my mates down south here in NZ ran a good time recently......1991 GT with CT20b, aussie exhaust downpipe, 3" mandrel exhaust with n1 muffler, GReddy PRofec B, Tom's panel filter in stock airbox, TRD 3 brass button clutch......ran a 12.857 @ 108.7mph
Thought that was pretty good considering the lack of any ajor mods.
Cheers
KiwiMR2
Thought that was pretty good considering the lack of any ajor mods.
Cheers
KiwiMR2
Re: Joining the 300bHP club??
I must admit it was a great start 1.87 60ft. Timing slip is here.
http://homepage.ntlworld.com/darcy2/pic ... sttime.jpg
Mine is the one on the right (the scooby next to me didn't have a chance silly scoobsys )
http://homepage.ntlworld.com/darcy2/pic ... sttime.jpg
Mine is the one on the right (the scooby next to me didn't have a chance silly scoobsys )
-
- Posts: 11298
- Joined: Wed Dec 15, 2004 9:27 am
- Location: Eastbourne
- Contact:
Re: Joining the 300bHP club??
I managed 12.860 at 110.55mph with lousy starts of 2.0s. It was bogging down every time and i know for sure i can drop at least 0.2 off of that time.
Re: Joining the 300bHP club??
i spose all this proves the ct26 is quite a capable turbo upto 300bhp. I still wouldn't want to risk running the injectors that near the edge. Just my personal opinion.