Hi all
Iv been looking around for a mk1 carbon bonnet and engine bay lid for a while now without no luck at all, there only seems to be a market in the US.
But after looking into it more I have now found a company who will make a mould for the bonnet and engine lid (hopefully based on the s/c with the raised vents) in carbon or fiberglass. See email below:
Hi Martin,
Thats sounds good to me, we are looking around 8+ people to start group buy and if the people concern about quality & fitment, they are welcome to check all our other products for that and also there are few people have the MarkII MR2 which in the owners club and you should be able to get some feedback from them.
If there is any questions, please feel free to contact us.
EPRacing
So im just wondering if there would be anybody who wants either a carbon fibre or fibre glass engine bay lid or bonnet. If you interested either drop me a pm or put ya name down.
ESTIMATES ARE AS FOLLOWS
MR2 MK1 Carbon Bonnet Retail £380 Group Buy £300 + £35 carriage
MR2 MK1 FRP Bonnet Retail £280 Group Buy £200 + £35 carriage
MR2 MK1 Carbon Engine Cover Retail £280 Group Buy £220 + £15 carriage
MR2 MK1 FRP Engine Cover Retail £200 Group Buy £140 + £15 carriage
These prices was given to me by email and are estimates but should be this price if we get 8 people interested.
I have put this post up on several sites to see the interest so we should easily get 8.
Any questions let me know please
MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Moderators: IMOC Moderators, IMOC Committee Members
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Right i have an update on the C/F bonnets they will now incorparate a bonnet vent called the papal vent made on the twobrutal site see pic below:
CLICKY
we have already got 5 people who want this bonnet in carbon fibre so we only need 5 more to make a group buy please dont miss this chance to own a very rare one off bonnet that will be 50% lighter than standard and also increase downforce on the front end.
Any questions fire at will or view this link CLICKY
CLICKY
we have already got 5 people who want this bonnet in carbon fibre so we only need 5 more to make a group buy please dont miss this chance to own a very rare one off bonnet that will be 50% lighter than standard and also increase downforce on the front end.
Any questions fire at will or view this link CLICKY
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
The list so far
Paul Woods (twobrutal)
Sideways freak (twobrutal)
Millentubby(twobrutal)
Me
JimSr Maybe ????(twobrutal)
OlberJ(twobrutal)
Surely theres gotta be a few more out there, bare in mind that this will be a group buy and wont require payment straight away as mould will have to be made
Paul Woods (twobrutal)
Sideways freak (twobrutal)
Millentubby(twobrutal)
Me
JimSr Maybe ????(twobrutal)
OlberJ(twobrutal)
Surely theres gotta be a few more out there, bare in mind that this will be a group buy and wont require payment straight away as mould will have to be made
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
How long would it take for this to be finalized? I would love a CF frunk but cant get the cash together ATM...
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
hey mate cheers for reply we are looking at about a month turn around hopefully when we get 10 names down, i have got 6 so far so just a few more then i get the order in mate. Let me know when you can have cash by and il confirm if its ok.
Cheers
Cheers
-
- Posts: 5494
- Joined: Mon May 16, 2005 8:40 pm
- Location: Wickford, Essex
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
im interested too
I emailed a company on ebay as i saw some cf headlight covers for the mk2, to see if there were any for the mk1...
I emailed a company on ebay as i saw some cf headlight covers for the mk2, to see if there were any for the mk1...
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
stick me down for a cf bonnet with the papal vent
pm me with details when you are ready to go. i am normally on TB though
pm me with details when you are ready to go. i am normally on TB though
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
does the sc lid have two raised vents in it? if so i may be tempted into a cf one of them as well.
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
also, couldn't find anything on TB about this. you might find you get a better response
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Interested in this - for the bonnet.
The SC does have 2 raised sections - however, on a normal SC lid (which is already made of FG and not that heavy) only the one on the passenger side is actually a real vent - it's where the IC would sit and seal.
The SC does have 2 raised sections - however, on a normal SC lid (which is already made of FG and not that heavy) only the one on the passenger side is actually a real vent - it's where the IC would sit and seal.
tonigmr2 wrote:Fear me, for I am watching
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
also, I think I know what that vent is on the bonnet, but can you repost/host the picture somewhere where I can see it - not a member on TB.
tonigmr2 wrote:Fear me, for I am watching
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Coolio
Any progress on the GB numbers?
Any progress on the GB numbers?
tonigmr2 wrote:Fear me, for I am watching
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Ummm, quick scan through the thread and it seems that the OP is awaiting a template of the Papal bonnet design (as in a borrowed one) so that the mould can be made up.
On the plus side, this gives me more time to try to beg the money off of someone...
On the plus side, this gives me more time to try to beg the money off of someone...
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Well, if they haven't noticed little old me over here, let them know that I'm interested anyway.
MartG had a bonnet he'd made up for his new track-car with the vent in.. I guess they could ask him if they could swap it for another one while he is building the rest of it....
tonigmr2 wrote:Fear me, for I am watching
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
Speedy wrote:Well, if they haven't noticed little old me over here, let them know that I'm interested anyway.
Done.
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
sorry lads iv got this on 3 sites and will run the group buy from twobrutal, sorry of this causes any problems but most of the people interested are on there and thats my main site i use.
We have had a lot of interest in the bonnets alone so this group buy will definitely go ahead, as for the engine bay lid these will have the raised turbo vents in them. I am also going to get carbon headlight covers for my self so if any one wants them let me know.
We have had a lot of interest in the bonnets alone so this group buy will definitely go ahead, as for the engine bay lid these will have the raised turbo vents in them. I am also going to get carbon headlight covers for my self so if any one wants them let me know.
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
martin-mk1 wrote:as for the engine bay lid these will have the raised turbo vents in them.
Do you mean similar to the SC ones? Do you have an example piccie anywhere, as it's the engine bay lid I'm really after...
martin-mk1 wrote:I am also going to get carbon headlight covers for my self so if any one wants them let me know.
Will you be getting the pattern alignment matched to the bonnet? If so, this may help gain a bit more interest as there was discussion on this in the Mk1 section recently.
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
martin-mk1 wrote:sorry lads iv got this on 3 sites and will run the group buy from twobrutal, sorry of this causes any problems but most of the people interested are on there and thats my main site i use.
We have had a lot of interest in the bonnets alone so this group buy will definitely go ahead, as for the engine bay lid these will have the raised turbo vents in them. I am also going to get carbon headlight covers for my self so if any one wants them let me know.
No problem, just let me know when/where the money is due
tonigmr2 wrote:Fear me, for I am watching
Re: MK1 CARBON AND FIBRE GLASS BONNET & ENGINE LID GROUP BUY????
monkeymax wrote:martin-mk1 wrote:as for the engine bay lid these will have the raised turbo vents in them.
Do you mean similar to the SC ones? Do you have an example piccie anywhere, as it's the engine bay lid I'm really after...
martin-mk1 wrote:I am also going to get carbon headlight covers for my self so if any one wants them let me know.
Will you be getting the pattern alignment matched to the bonnet? If so, this may help gain a bit more interest as there was discussion on this in the Mk1 section recently.
Basically the guy can mould any thing you want in carbon fibre but i was going along the lines with the s/c and turbo style raised vents to be honest.
As per the light covers im sure he will try his best to get identical allignment on the covers if its possible. I hope so anyway