Hi,
This is probably a stupid question but thought i'd be best to check before doing anything!!
I have an oil pressure gauge on the A pillar now. Today i wired up the light for it which wasn't a problem. but one wire has to go to the ignition switch. Whereabouts is the best place to wire this into? closer to the A pillar the better!!
Cheers
Andrew
Ignition Switch?
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 6213
- Joined: Tue Dec 14, 2004 7:14 pm
- Location: glasgow
- Contact:
Re: Ignition Switch?
you could tap into the lighter socket as it has a switched live or the radio lines as there is more space to mess about with the wiring. Plus if you have a radio wiring harness adaptor you can tap into that without afecting the original wiring.
edit - whether you think the question is stupid should not stop you asking if you are stuck. That's what this place is about.
Unless you are Chris spammon in which case it likely is a stupid question deserving only a stupid answer :D:D
edit - whether you think the question is stupid should not stop you asking if you are stuck. That's what this place is about.
Unless you are Chris spammon in which case it likely is a stupid question deserving only a stupid answer :D:D