Removed from my 5S build to make way for a dry sump setup, a complete bolt in kit that mounts the oil filter on the chassis leg below where the stock intercooler sits.
Kit contents:
- Mocal take off plate with oil seals
- 2 x JIC -10 adapters for take off plate
- 2 x dowty wshers for take off plate adapters
- -10 stainless steel braided lines (x2) complete with aluminium hose ends (90 degree and straights)
- One way valve and adapters on the send line to the oil filter
- Mocal remote oil filter plate
- 2 x JIC -10 adapters for oil filter plate
- 2 x dowty washers for oil filter plate adapters
To purchase this kit (or very similar):
Take off plate and top hat
http://www.jjcraceandrally.com/race/san ... d-1-2bsp-2
Compact remote oil filter plate
http://www.jjcraceandrally.com/race/san ... ilter-head
4 fittings
http://www.jjcraceandrally.com/race/san ... -adaprtors
4 dowty washers
http://www.jjcraceandrally.com/race/san ... lter-heads
2 x 90 degree hose ends -10
http://www.speedflowshop.co.uk/-10-an-9 ... 1758-p.asp
2 x Straight hose ends -10
http://www.speedflowshop.co.uk/-10-an-s ... 1740-p.asp
2m Braided hose -10 (might get away with 1 depending on where mounting)
http://www.speedflowshop.co.uk/stainles ... 2433-p.asp
One way valve
https://www.merlinmotorsport.co.uk/p/go ... s-g-fcv-10
-10 female to female connector
http://www.speedflowshop.co.uk/-10-an-s ... 2165-p.asp
If my maths is correct- £422.33 excluding postage, including VAT...but you may find stuff cheaper by hunting around.
£199 plus postage and paypal fees, or collection from near Gloucester.
Contact via PM please.
[FINALIZED] Remote oil filter kit (rev 1/2 or 5S)
Moderators: IMOC Moderators, IMOC Committee Members
Re: [FINALIZED] Remote oil filter kit (rev 1/2 or 5S)
Hi Ashley,
Where are you getting your dry sump kit from? I assume it would be trivial to add an oil cooler into the path of this setup somewhere? When I finally get round to the A2W setup install, I was planning on putting a oil cooler near the side vent where the intercooler is.
Where are you getting your dry sump kit from? I assume it would be trivial to add an oil cooler into the path of this setup somewhere? When I finally get round to the A2W setup install, I was planning on putting a oil cooler near the side vent where the intercooler is.
-
- Posts: 6071
- Joined: Wed Dec 15, 2004 10:16 am
Re: [FINALIZED] Remote oil filter kit (rev 1/2 or 5S)
This Sale has been completed. The Buyer was None