[Mk2] [Turbo] Oil and water temps on track - what do you see?

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

Chumbaside
Posts: 635
Joined: Thu Dec 16, 2004 10:52 pm
Location: Sutton Coldfield

Re: [Mk2] [Turbo] Oil and water temps on track - what do you see?

Post by Chumbaside »

androo007 wrote:They're good to about 400hp.


The old core - the one you had? - yes.

Rogue agree the new core is far more efficient and good for more. But given the price of a new setup, not many take the plunge!

Hence why I'm curious. So much "data" on here amounts to tribal knowledge. That can be both good and bad; if a company constantly develops a product, that knowledge can quickly fall into the "bad" category!

As Radtec make the cores from scratch they benefit from the latest advances. Same with their pre-rads. These aren't products that were designed and manufactured in the 90's and have been doing the rounds ever since. There are many folks using Radtec products at much higher than 400hp, they just don't drive MR2's.

Each to their own, not looking to start an argument either :thumleft:
Post Reply

Return to “Modifications”