I have switched from a rev2 engine to forged engine and rev3 wiring hence this is now available.
£275 + Postage
* Removes or raises fuel cut (I was running 1 bar)
* Raises rev limiter - Cant tell you by how much I'm not that brave!
* Removes speed limiter
* Photo showing capacitors in good health
Ive run it on a ct26 and CT20b with no issues. The response was always good, I cant say for sure if it has an improved ignition and fuel map but either way the car did always seem fast and respond well.
At first I couldn't tell what had changed as normally there is a slave board or something and it looked quite stock, but then from the human soldering I could see the main chip had been changed. You can see the difference.
[FINALIZED] Rev2 Turbo Fields ECU
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 659
- Joined: Thu Jul 26, 2012 8:00 am
Rev2 Turbo Fields ECU
My Blog on Miami GT4 kit car build using MR2 Donor Car
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
Re: [FINALIZED] Rev2 Turbo Fields ECU
If the part number on the main chip is D151802-9361 then that's the normal part.
I'd suggest that at some point in the past it has had a daughterboard fitted but for some reason it has been removed and the main chip re-soldered back into position.
I'd suggest that at some point in the past it has had a daughterboard fitted but for some reason it has been removed and the main chip re-soldered back into position.
-
- Posts: 659
- Joined: Thu Jul 26, 2012 8:00 am
Re: [FINALIZED] Rev2 Turbo Fields ECU
jon wrote:If the part number on the main chip is D151802-9361 then that's the normal part.
I'd suggest that at some point in the past it has had a daughterboard fitted but for some reason it has been removed and the main chip re-soldered back into position.
cheers Jon, ill check it out.
Bit weird never hitting fuel cut on rev 2 at 1bar though isnt it?
My Blog on Miami GT4 kit car build using MR2 Donor Car
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
Re: [FINALIZED] Rev2 Turbo Fields ECU
this is my Avance ecu, I don't know anything about modded ecu's but this looks vastly different,
-
- Posts: 659
- Joined: Thu Jul 26, 2012 8:00 am
Re: [FINALIZED] Rev2 Turbo Fields ECU
thanks Guys, ill sell this as a normal Rev2 ECU I think.
If its not someone gets a bonus
If its not someone gets a bonus
My Blog on Miami GT4 kit car build using MR2 Donor Car
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
http://miamigt4kitcar.blogspot.co.uk/
twitter for photo's as I'm building -
www.twitter.com/iwanabeaferret
-
- Posts: 6071
- Joined: Wed Dec 15, 2004 10:16 am
Re: [FINALIZED] Rev2 Turbo Fields ECU
This Sale has been completed. The Buyer was None