[Mk2] [Turbo] pagid handbrake cables

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
rossonza
Premium Member
Posts: 957
Joined: Tue Dec 20, 2016 2:34 pm
Location: West Midlands

[Mk2] [Turbo] pagid handbrake cables

Post by rossonza »

my stock cables were seized, so ive removed them from the rear calipers. looked at toyota new and thought im far too much of a cheap skate to buy them. found some pagid on ebay.

Anyone had an experience with the Pagid cables?

http://www.ebay.co.uk/itm/Pagid-Left-Re ... 1438.l2649
Caleb-mr2
Posts: 108
Joined: Mon Jul 04, 2011 5:38 pm
Location: N.Ireland

Re: [Mk2] [Turbo] pagid handbrake cables

Post by Caleb-mr2 »

Pretty sure I had these on my na mk2 a few years ago.

Didn't have any issue with them and did the job!
mr2garageswindon
Posts: 282
Joined: Wed Oct 15, 2014 3:02 pm

Re: [Mk2] [Turbo] pagid handbrake cables

Post by mr2garageswindon »

I've fitted Pagid a few times. They are ok but never fit as well as Toyota ones however they aren't £80 odd quid a side from Pagid.
Usual problem is you have to file down the ends of the strands of cable where they protrude too far where it connects to the front cable section.
No big deal I know but have a file handy when you do them.
qwakers
Posts: 342
Joined: Sun Sep 11, 2016 9:01 pm

Re: [Mk2] [Turbo] pagid handbrake cables

Post by qwakers »

http://www.ebay.co.uk/itm/TO-CLEAR-NEW- ... 488e121afe
i used these, seem to work ok, have them on 2 cars now. out of stock atm though.
pbmr2
Posts: 929
Joined: Fri Jun 18, 2010 12:49 pm

Re: [Mk2] [Turbo] pagid handbrake cables

Post by pbmr2 »

Pagid are alright, worked well on my car. Better than some cheaper ones that were the same partnumber both sides, there is a slight difference side to side and Pagid ones are sided so do work.
rossonza
Premium Member
Posts: 957
Joined: Tue Dec 20, 2016 2:34 pm
Location: West Midlands

Re: [Mk2] [Turbo] pagid handbrake cables

Post by rossonza »

thanks guys, i'll give them a go, better than my current rusted ones :thumleft:
Post Reply

Return to “Modifications”